JL Wrangler | JT Gladiator Dog Leg Tie Rod End, Left Hand Thread - Passenger Side
The Dog-Leg Rod End is a left-hand threaded end designed for the passenger side of the MetalCloak Jeep JL Wrangler or JT Gladiator Tie Rod.
Features Include:
- Fits JL Wrangler And JT Gladiator With MetalCloak Tie Rod
- Tie Rod Passenger-Side Rod End
- Left-Hand Thread
- Anti-Flop Feature
- 1-Ton Rod Ends
- JL/JT-Specific OE Bolt Taper
- Sealed Boot
- All Required Hardware
- Easy To Install
The Dog-Leg Rod Ends are engineered with the MetalCloak Anti-Flop feature. The Anti-Flop feature provides a full side-to-side range of motion that ensures bind-free steering when pushing the extremes of your Jeep's travel and articulation, while a limited "front-to-back" range of movement built into the rod end eliminates the possibility of the offset allowing the rod end to "flop".
Note: MetalCloak recommends you have a suspension specialist align your Jeep once MetalCloak suspension is installed.
[click for less...]
VIDEOS
MetalCloak's Jeep JL Wrangler & JT Gladiator Suspension.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off-Road Enthusiast.
THE TECH
JL Wrangler & JT Gladiator Tie Rod Dog-Leg Rod End
The Tie Rod Dog-Leg Rod Ends have factory-like fitment with an OE taper pin and lock nut. The dual 1-ton forged and heat-treated Dog-Leg Rod Ends have strength AND provide clearance for use with stock or aftermarket wheels, allowing the best turning radius possible. Sealed with durable rubber grease boots, the ends are easily serviceable via zerk fittings.
Dog-Leg Rod End Specifications
WORKS WITH STOCK BACKSPACING!
Boot Sealed - Keeps grease in and dirt out
Anti-Flop Feature - Precision range of movement
Maximum Tire/Wheel Clearance - Correct steering radius
Massive 1-Ton Rod Ends - Provides additional strength
Oversized 1-Inch Threads - More material at critical area
JL/JT-Specific OE Bolt Taper - Secure mount
Oversized, Forged & Heat-Treated Housing - Exclusive
Anti-Flop Feature
This specially designed rod end has been engineered just for the JL Wrangler and JT Gladiator steering.
A full side-to-side range of motion ensures bind-free steering when pushing the extremes of your Jeep's travel and articulation, while a limited "front-to-back" range of movement built into the rod end eliminates the possibility of the offset allowing the tie rod to "flop".
What's in the Kit?
- Dog-Leg Tie Rod End
- Flange Nut
- Jam Nut
- Zerk Fitting
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2018-Current JL Wrangler | 2019-Current JT Gladiator |
| Tie Rod Ends | Serviceable |
INSTALLATION
| Installation Difficulty | Easy |
| Body Modification | None |
| Time to Install | 1 Hour |
| Installation Instructions | Written instructions are not provided for this product. If you have questions about this kit, please reach out via the Contact Us form. |