JK Wrangler Aluminum Housing, Rear ExoSkin & ExoCorner Kit, Pair
The Rear ExoSkin & ExoCorner Kit provides protection for the vulnerable corner of your Jeep JK Wrangler. Replaces the dim factory taillights with Hi-Visibility/Lo-Profile LED tail lights mounted in custom Aluminum housings.Features Include:
- 1/8" Cold Rolled Steel ExoSkins
- ExoSkin Mounting Template
- 6061 T6 Aluminum Bar ExoCorner Rails
- 6061 T6 Aluminum LED Housings
- Hi-Vis/Lo-Pro LED Tail Light Replacements
- LED Resistors
- 1/8" Steel Rear ExoCorner Plates
- Type III Anodized Black Aluminum Finish
- Black Powder Coated Steel Finish
- Easy Installation
- Made in the USA
The Rear ExoSkins are made of strong laser cut 1/8" cold rolled steel. MetalCloak provides a full size drilling template to guide your installation and ensure a perfect fit. The Rear ExoSkins are finished in MetalCloak signature black powdercoat.
The Rear ExoSkin & ExoCorner Kit provides resistors to correct and prevent hyper-blinking; this correction retains the turn signals standard/OE flash rate. The added resistors also prevents warning messages from being triggered on the dashboard. The resistors finned, aluminum, heat-sink design helps dissipates heat when in use for long life.
Note: The rear exoskin and exocorner kit work with both the overland and hardline rear fenders.
Note:This product does not come in raw metal.
[click for less...]
MetalCloak's Jeep JK Wrangler Body Armor
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Overland Rear ExoSkins
Rear ExoSkins provide additional strength to the rear of your Jeep and protect the vulnerable sheet metal of the quarter panel of the Jeep.
ExoCorner LED Tail Light Kit
Add the needed protection with an upgraded style, efficiency and performance of LED taillights on your JK Wrangler!
MetalCloak's Premium Black Textured Powdercoat process is detailed in this updated video.
JK Rear ExoSkin & ExoCorner Kit
The Rear ExoSkins add protection and strength to the vulnerable rear corners of your JK Wrangler.
- 1/8" Laser Cut Steel
- Premium Black Texture Powdercoat
- Includes Sheet Metal Drill Template
The system secures via Riv-Nut mounting and includes a sheet-metal drilling template that takes the guesswork out of installation.
JK ExoCorner LED Kit
The ExoCorner is the first Corner Guard for the JK that requires no cutting of the JK body just to make it fit.
1. ExoCorner Rail - T6 Aircraft Grade Aluminum provides over a 1/4" of True Corner Protection.
2. JK LED Housing - T6 Aircraft Grade Aluminum replacement LED housing is the first truly solid JK Aftermarket Light System that requires no Body Modification and can be used with or without the ExoCorner bolting right into your stock light position.
3. LED Tail Light - Much brighter then stock lights, these LEDs are SAE/DOT compliant and wire up directly.
4. Rear ExoSkin & Rear Corner Plate - Providing just the right amount of protection while eliminating the need to cut up your JK just to make the corner fit.
Stock vs. MetalCloak - Tail Light Profile
The machined billet 60601 T6 aluminum housings incorporate low profile LED replacement tail lights for a truly custom upgrade from stock.
Stock vs. MetalCloak - Tail Light Luminosity
Much brighter then stock lights, these LEDs are SAE/DOT compliant and wire up directly.
The Rear LED Kit provides resistors to correct and prevent hyper-blinking; this correction retains the turn signals standard/OE flash rate. The added resistors also prevents warning messages from being triggered on the dashboard. The resistors finned, aluminum, heat-sink design helps dissipates heat when in use for long life.
What's in the Kit?
- Driver & Passenger Rear ExoSkins
- Rear ExoSkins Template
- ExoCorner Rails
- LED Housing
- LED Tail Lights
- Resistor Brackets
- Rear Corner Plate
- All Required Hardware
|Compatibility||2007 - 2018 JK Wrangler|
|Rear ExoSkin||1/8" Cold Rolled Steel|
|ExoCorner Plate||1/8" Cold Rolled Steel|
|ExoCorner Rail||T6 Aluminum|
|LED Housing||T6 Aluminum|
|Steel Coating||Black Powdercoat|
Finish: This system comes in MetalCloak's signature black powdercoat only.
|Body Modification||Some Drilling & Wiring|
|Time to Install||2 - 3 Hours|
|Installation Instructions||Click Here to see a full list of MetalCloak Installation Instructions.|