Carbon JL Rubicon Front D44 30 Spline One Piece Conversion Kit
The Front Dana 44 Axle Conversion Base Kit is a tremendous upgrade to convert your factory CAD housing into a one piece axle design, providing increased strength and durability for your Rubicon JL Wrangler.
Features Include:- For Rubicon JL Wrangler Dana 44 Front Axles
- Made of 4340 High Strength Chromoly
- Comes With Both Driver and Passenger Axles
- Spicer U-Joint Fully Assembled with Standard Clips
- Bolt In Application, No Modifications Required
- Uses Large 5-7166X Series Spicer U-Joint
- Dual Heat Treat Designed for Strength & Durability
- Block Off Plate Included
- Over 50% Stronger than Stock
The axles are designed with large 5-7166X Series Spicer U-Joints. The Spicer U-Joints are engineered with a solid cold-formed body while the bearing cups are heat treated for strength. The u-joint is precision ground and case hardened for durability and the multi-lip seal keeps the grease in and contaminants out. The Spicer U-Joints come fully assembled with standard clips and are ready to install.
The axles include both the passenger and driver side axle shafts and come with a block off plate. The block off plate replaces the vacuum-actuated fork housing allowing you to convert your center axle disconnect (CAD) housing into a one piece axle design.
Note: Removal of the FAD system may cause driveshaft vibrations. Will require a programmer (Tazer mini) to remove dash light warning.
[click for less...]
THE TECH
Carbon JL Rubicon Front D44 30 Spline One Piece Conversion Kit
![Carbon Offroad TJ/YJ/XJ Front D30 Axle Kit](https://images.metalcloak.com/CarbonOffroad/Products/C0011-JL-Wrangler-Front-D44-One-Piece-Conversion-Kit/C0011-Carbon-Offroad-Front-Dana-44-Axles.jpg)
The Front Dana 44 axle kit is for Rubicon JL Wranglers and converts your CAD housing to a One Piece solution. The Axle are made of 4340 chromoly steel and is dual heat treated for unprecedented strength and durability making the Carbon Off-road Axles over 50% stronger than stock!
5-7166X Series Spicer U-Joints
The axles are designed with large 5-7166X Series Spicer U-Joints. The Spicer U-Joints are engineered with a solid cold-formed body while the bearing cups are heat treated for strength. The u-joint is precision ground and case hardened for durability and the multi-lip seal keeps the grease in and contaminants out. The Spicer U-Joints come fully assembled with standard clips and are ready to install.
![5-7166X Series Spicer U-Joints](https://images.metalcloak.com/CarbonOffroad/Products/C0011-JL-Wrangler-Front-D44-One-Piece-Conversion-Kit/C0011-Carbon-Offroad-Front-Dana-44-Spicer-U-Joint.jpg)
CAD Housing Block Off Plate
![CAD Housing Block Off Plate](https://images.metalcloak.com/CarbonOffroad/Products/C0011-JL-Wrangler-Front-D44-One-Piece-Conversion-Kit/C0011-Carbon-Offroad-Front-Dana-44-Block-Off-Plate.jpg)
The axles include both the passenger and driver side axle shafts and come with a block off plate. The block off plate replaces the vacuum-actuated fork housing allowing you to convert your center axle disconnect (CAD) housing into a one piece axle design and is laser etched with the Carbon Offroad Logo.
TECHNICAL SPECIFICATIONS
Items | Details |
---|---|
Compatibility | 2018 + JL Wrangler (Rubicon) |
Axle | 4140 Chromoly Steel |
IMPORTANT NOTES
Requirements: Removal of the FAD system may cause driveshaft vibrations. Will require a programmer (Tazer mini) to remove dash light warning.