Bronco 6G Front Bumper System, Non-Winch Edition
Front Non-Winch Bumper for the Bronco by MetalCloak. Rock-Crawling heritage and desert race inspired design with utilitarian functionality. Clearance, Protection, and practical utility with great looks.
Features Include:- 3/16" Steel Base
- 2"OD X .125 Wall DOM Tube
- Full Length Skid Plate
- Provisions for Factory Sensors
- 2 Machined 1x2 Steel D-Ring Recovery Points
- Frame Mounted Strength
- All Hardware Required
- Made in the USA
Choose the skid plate for you needs; a light weight aluminum version or strong steel skid plate. Skid protection runs from the bumper down to the axles center section that ensures you slide up and over the hazards while out on the trail.
Massive recovery points made of machined 1x2 machined steel are at the ready when the time comes. The D-Ring Recovery Points have a rounded edge design that allows for either the use of a standard metal D-Ring or Soft Shackle.
Every aspect of this bumper has been thought out; sensor holes to retain factory safety features, angled end caps for clearance and some of the best approach angles you are going to find.
If you are Looking for a fantastic addition to upgrade your bumper for your Bronco; get the protection, clearance and additional practical features from a MetalCloak Front Bumper that is made right here in the USA.
Note: The MetalCloak Bronco Front Bumper does not fit the Bronco Raptor.
[click for less...]
VIDEOS
MetalCloak's Bronco 6G Bumpers
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Premium Black Powder Coat
Our signature Black Textured Powder coat provides a micro-texture semi-gloss finish that is easily repairable after trail damage. Watch the video to learn more.
Proudly Made in the USA
MetalCloak proudly manufactures products in America. Take a glimpse of our incredible team that lives and breaths innovation and quality.
THE TECH
Bronco 6G Front Bumper System
Front Winch Bumper for the Bronco by MetalCloak. Rock-Crawling heritage and desert race inspired design with utilitarian functionality. Clearance, Protection Lo-profile winch mount, practical utility with great looks.
End Caps
The strong 3/16" steel base attaches to the tube end caps and completely wraps around to the sides of the vehicle providing full protection.
Skid Plate
A full length skid plate runs from the bumper to your center section to ensure you slide up and over the hazards on the trail. MetalCloak allows you to choose between a steel skid plate that comes in our signature textured black powder coat or shed some weight with the aluminum skid plate option which comes in a raw finish.
D-Ring Recovery Points
Massive recovery points made of machined 1x2 machined steel are at the ready when the time comes.
The D-Ring Recovery Points have a rounded edge design that allows for either the use of a standard metal D-Ring or Soft Shackle.
Factory Sensors
Fits the factory sensors into your bumper with a factory OEM look and function.
- Works on 3/16" Bumpers
- Fits 1" Diameter Hole
- Made of UV Resistant ABS
- Snaps Into Place
What's in the Kit?
- Front Bumper Base
- End Caps
- Steel or Aluminum Skid Plate
- Recovery Points
- Factory Sensor Clips
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2021 + Bronco 6G |
| Front Bumper Base | 3/16" Hot Rolled Steel |
| End Caps | 3/16" Hot Rolled Steel 2.0" OD X .125 Wall DOM Steel Tube |
| Skid Plate | 3/16" Hot Rolled Steel 3/16" 5052-H32 Aluminum Plate |
| Coating | Black Powder Coat Aluminum Skid Plate - Raw Metal |
IMPORTANT NOTES
Note: The MetalCloak Bronco Front Bumper does not fit the Bronco Raptor.
INSTALLATION
| Installation Difficulty | Moderate |
| Body Modification | None |
| Time to Install | 4 - 5 Hours |
| Installation Instructions | Click Here to see a full list of MetalCloak Installation Instructions. |