It's Your Jeep, Only Better

Overland Tube Fenders, JL Wrangler, Rear

Metalcloak's JL Wrangler Overland Rear Fenders are the first production Steel Tube Fenders for the Jeep JL to have more clearance then Stock JL Rubicon Fenders with excellent coverage above and around the tire, matching with most stock or wide bumper options.

Built with Metalcloak's award winning standard for quality and fitment, these fenders provide great looks with the additional strength of steel in an easy to install package.

Note: This system comes in Raw and MetalCloak's Signature Black Powdercoat.

Availability: Raw Metal Should Ship in 2 to 3 Weeks
Product Code: 6400*
Dividing Line
This short video covers what you need to know about the Overland Tube Fenders for the JL Wrangler.

<<< Check Out the Video

Dividing Line
The Second Half of our Overland Series...

The JL Wrangler Overland Rear Flare provides 6" of coverage and an increased "mud guard" to line up with stock style rear bumpers.

  • Easy to Install
  • Full Rear Tire Coverage
  • Same Great MetalCloak Craftsmanship
Rear Overland Flares
Dividing Line


MetalCloak Rear JK Fenders

The engineers at MetalCloak made an extra effort to ensure the Overland Rear Flares had the additional "mud guard" many of you were asking for.
  • 6" Flare with Additional Tire Coverage
  • Lines Up with Most Full Size Rear Bumpers
  • Solid Construction to Handle Hits and Scrapes
Dividing Line


Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Raw Metal Premium Black Textured Powdercoat
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two to three weeks. Check out our video on how we powdercoat.
Raw Metal
Dividing Line
Driver & Passenger Rear Fenders 12GA Cold Steel Plate
1 1/2" .120 Steel Tubing
Solid Steel Ball Ends
Total Weight 56 lbs
Available in Raw? Yes
Available in Black Powdercoat? Yes
Dividing Line
Installation Difficulty Easy - Bolt On
Body Modification None, Some Drilling Required
Time to Install 2 - 3 Hours
Dividing Line


At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
Dividing Line
Write Your Own Review
You're reviewing:Overland Tube Fenders, JL Wrangler, Rear
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.