It's Your Jeep, Only Better

Outboard Shock Mount Spacer, Relocation Kit, JK Lower Front

The MetalCloak JK Outboard Front Lower Shock Mount Spacer Kit is engineered to move the lower shock mounts away from the JK Wrangler Jeep frame rails. (Now with more support!)

The MetalCloak Outboard Shock Mount works for JK Wrangler Stock and JK Aftermarket shocks!

The Outboard Shock Mount Spacer Kit includes:

  • Driver & Passenger Lower Front Shock Mount Brackets
  • Shock Mount Spacers
  • All Necessary Hardware for Installation

Note: The JK Outboard Front Lower Shock Mount Spacer Kit is for Stock Axle Application Only

$69.00
Rating:
95% of 100
Availability: Usually Ships in 2-3 Days
Product Code: 7104

Dividing Line
JK OUTBOARD SHOCK MOUNT SPACER
This short video covers what you need to know about the basics of The JK Outboard Front Lower Shock Mount Spacer. MetalCloak JK Outboard Front Lower Shock Mount Spacer is engineered to move the lower shock away from the Jeep frame rails and rotate the shock eyelet from factory position by 90 degrees allowing it to swing with the axle vs bind on the bushing. The outboard shock mount increases clearance for the shock body when at the extremes of articulation and eliminates interference.

Check Out the Video>>>

Dividing Line

7104 With Shock Rotation

Bracket rotates the shock eyelet from factory position by 90 degrees; allowing it to swing with the axle vs bind on the limited rubber material

7104 Before & After

Dividing Line

WHAT'S IN THE KIT?

MetalCloak Jeep JK Outboard Front Lower Shock Mount Spacer Kit:
  • Engineered to move the lower shock mounts away from the Jeep frame rails increasing clearance for the shock body at the extremes of articulation.
  • Treated with Gold Zinc Chromate for the ultimate in defense against the elements.
  • Manufactured from laser cut 3/16" steel and CNC bent for superior strength and exact fitment.
  • All Grade 8 hardware provided
IMPORTANT NOTE: If using OE wheels 2" spacers will be needed to give proper clearance. These mounts are intended for use for wheels with 4.5" of backspacing or less or an equivalent of a 2" spacer on factory wheels.

Note: The JK Outboard Front Lower Shock Mount Spacer Kit may come with either hex head or button head hardware.
7104 With Shock Rotation
Dividing Line
TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
SHIPPING & MATERIAL SPECIFICATIONS
ItemsMaterials
Outboard Shock Spacer 7GA Hot Rolled Steel
Total Weight 10 lbs
Available in Gold Zinc? Yes

OEM Clevite and Typical Flex Joint is the Duroflex Joint
INSTALLATION
Installation Difficulty Easy-Bolt on
Body Modification None
Time to Install 1 Hour
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Icon

INSTALLATION INSTRUCTIONS:

At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Rating:
95% of 100
Write Your Own Review
You're reviewing:Outboard Shock Mount Spacer, Relocation Kit, JK Lower Front
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.