It's Your Jeep, Only Better

Universal Adjustable Bump-Stop System (1" - 4")

The MetalCloak Adjustable Bump-Stop System is designed for TJ/LJ front & rear and JK & XJ fronts.

Each kit provides...
  • Stackable Individual Pads
  • Easy Height Adjustment for 1", 2", 3", or 4"
  • Hard Thermoset Rubber (90 durometer) Material
  • No Need to Remove Coils for Adjustment (after install)
Complete Adjustable Bump-Stop Kit Includes:
  • (8) One Inch Rubber Thermoset Sectional Pads
  • (2) Gold Zinc Plated Steel Impact Caps
  • Black Oxide Bolts In Required Lengths for all Heights
Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once MetalCloak Suspension is Installed.

$79.00
Rating:
94% of 100
Availability: Usually Ships in 1 Week
Product Code: 7040

Dividing Line

BUMP STOPS
MetalCloak Adjustable Bump Stop System...
  • Adjust from 1" - 4" Without Removing Coils
  • Perfect Height Regardless of Tire Size
  • Thermoset Rubber Dampens Impact
  • Additional Pads Available on Request
Get Correct Bump-Stop Height Every Time!
  • 4" - Use all 4 sections and longest hardware bolts for maximum bump-stop height
  • 3" - Use all 3 sections and long hardware bolts for maximum bump-stop height
  • 2" - Two sections and medium hardware bolts are used for medium bump-stop height
  • 1" - One section and the short hardware bolts are used for the minimum bump-stop height
JK Sectional Bump-Stops
Dividing Line

DIMENSIONAL SPECIFICATIONS:

7040 Bump Stop Specs

Dividing Line
BUMP STOP SIZING RECOMMENDATIONS:
7040 Exploded view
TJ Bump Stop Recommendations
Dividing Line
TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
SHIPPING & MATERIAL SPECIFICATIONS
Items Materials
Bump Stops Thermoset Rubber
Total Weight 8 lbs
Available in Gold Zinc? Yes - Bump Stop Plate
OEM Clevite and Typical Flex Joint is the Duroflex Joint
INSTALLATION
Installation Difficulty Moderate - Some Drilling
Body Modification None
Time to Install 1 - 2 Hours
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Icon

INSTALLATION INSTRUCTIONS:

At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Rating:
94% of 100
Write Your Own Review
You're reviewing:Universal Adjustable Bump-Stop System (1" - 4")
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.