TJ/LJ Lock-N-Load Long Arm Duroflex Replacement Bushing Kit
A complete package to replace all the MetalCloak Duroflex™ Joints for your MetalCloak TJ/LJ Lock-N-Load Long Arm Suspension.
Features Include:- (2) SS-1032 - 2.25D x 2.0L x .50ID
- (2) SS-3025 - 3.0D x 3.26L x .79ID
- (10) SS-1031 - 2.63D x 2.62L x .57ID
- Duroflex Joints
- Maximum Vibration Dampening
- Self-Centering
- High Misalignment
- Unconstrained Rotational Flex
- Low Maintenance and Easily Rebuildable
The NVH properties of the Duroflex Joint with Kevlar infused rubber provides the smoothest vibration dampened ride along with durability. The high misalignment properties give great flex that self center; the combination gives a quiet, smooth and bind free suspension.
Note: This bushing kit replaces all bushings in MetalCloak control arms. If you have a MetalCloak Axle Bushing replacement kit, please call us to get those bushings added to the order, they are not included in this kit.
Note: Warranty valid ONLY if Duroflex Joints are installed on both ends of the control arm.
Note: MetalCloak recommends you have a suspension specialist align your truck once MetalCloak suspension is installed.
[click for less...]
VIDEOS
MetalCloak's Jeep Suspension Components are second to none.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
Duroflex 101
This short video covers what you need to know about the basics of the Duroflex Joint. How it should be used and what to expect when using it.
A Comparison of Flex
Comparing the Flex of the Duroflex Joint with that of the Johnny Joint, the Teraflex Monster and the typical Clevite.
Duroflex Joint Maintenance
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Joint Maintenance
Duroflex Joint Revealed
The MetalCloak Duroflex Joint gives better dampening properties over OEM style rubber Clevite Joints and provides more misalignment than “other” inferior Flex Joints.
Vibration Dampening
We tested our Duroflex Joint using a "Shaker Table" and seismometer app to show how much Vibration Dampening the Duroflex Joint gives you compared to other industry leading joints.
FMVSS 126 Compliant
MetalCloak not only has the best off road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
THE TECH
Duroflex Bushings
IT ALL STARTS WITH THE BUSHINGS
The Patented Duroflex™ Joint (metalcloakpatents.com) is the key to getting the greatest flex in a bolt-on suspension kit. Period.
MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment, Self-Centering, Rebuildable Joint with an OEM quality ride.
Now with Kevlar!
DuPont™ Kevlar® Fiber is now compounded in the proprietary elastomer of the Duroflex Bushing, bringing even more strength, durability and performance.
Kevlar® is a synthetic fiber with extremely high tensile strength to weight ratio…five times stronger than steel and commonly used in bullet proof armor applications.
Duroflex Bushings w/Kevlar® can be identified by the MetalCloak “M” located on the outer surface.
The Duroflex Joint Provides The Best Ride. Period.
Made of a Proprietary Elastomer Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...
- The best ride quality
- No binding of your control arms.
- None of the micro-wear that DESTROYS Flex Joints
High Misalignment...
By adapting the High Transverse Flex characteristics of a typical Flex Joint, the Duroflex Joint gives you...
- Incredible Misalignment
- Self centering Control Arms
Absorbs Micro-Movements...
Because the Duroflex Bushing absorbs the millions of Rotational Micro-Movements found in your daily driving, you get...
- Improved Ride Quality
- None of the micro-wear that DESTROYS Flex Joints
True Bearing Surface...
The outer surface of the Duroflex Bushing acts as a bearing, breaking free when called for, giving you...
- Maximum Rotation & Articulation
- No "Binding Up" of the Control Arms
Low Maintenance & Rebuildable...
Unlike typical Flex Joints, the Duroflex does not require replacing key parts every year like others...
But, when you do need to rebuild it, it is MetalCloak Easy!
Just pull out the Duroflex Bushing, clean it up, add some new Teflon impregnated, synthetic silicone grease. Reassemble.
Done.
What's In The Kit?
- (2) SS-1032 - 2.25D x 2.0L x .50ID
- (2) SS-3025 - 3.0D x 3.26L x .79ID
- (10) SS-1031 - 2.63D x 2.62L x .57ID
TECHNICAL SPECIFICATIONS
Items | Details |
---|---|
Duroflex Joint | Proprietary Vulcanized Elastomer made with DuPont™ Kevlar® fiber |
IMPORTANT NOTES
Axle Bushing: This bushing kit replaces all bushings in Metalcloak control arms. If you have a MetalCloak Axle Bushing replacement kit, please call us to get those bushings added to the order, they are not included in this kit.
Warranty: Warranty valid ONLY if Duroflex Joints are installed on both ends of the control arm.
Alignment Specialist: MetalCloak recommends you have a suspension specialist align your truck once MetalCloak suspension is installed.
INSTALLATION
Installation Difficulty | Easy |
Body Modification | None |
Time to Install | 1 Hour |
Installation Instructions | Written instructions are not provided for this product. If you have questions about this kit, please reach out via the Contact Us form. |