TJ Full MetalCloak Arched System 6"
For those who are looking for a full MetalCloak TJ Full Arched 6" System, here it is, all in one convenient place. Save money too! We've automatically applied a little discount for you.
Features Include:- Arched Front Fenders
- Replacement Inner Fender Wells
- Replacement Battery Brackets
- Arched 6” Front Flares
- 21° Front Flare Object Deflection Angle
- Rocker Rails
- Boat Side Deflection Styling
- Built In Hi-Lift Points
- Full Corner Guards
- Fully Wrap Around Protection
- Rear 6” Flares
- Increased Tire Clearance
- Quick Release Removable Flare Option
- Easy Installation
- Made in the USA
The replacement inner fender wells are made of lightweight aluminum, fits perfectly into place, and designed to allow more tire clearance when wheeling.
MetalCloak provides replacement battery brackets allowing for more turning radius to help prevent rubbing. The battery brackets are made of strong 11GA steel, allows use of the stock battery and air box, and is finished in our signature gold zinc chromate to help protect it against the elements.
Arched flares are built tough with strong 1½ x .120 wall steel tubing and works in conjunction with the arched tube fenders to provide the tire coverage you desire with the strength you demand. Get the best turning clearance, best object deflection angle and best tire clearance in the industry.
The fully integrated rocker protection utilizes a dual linear bolt pattern on the tub (with the first pattern below the door and the second pattern below the axis of the step) preventing the "can-opener" effect seen when typical rockers hit a hard object.
The rocker rails maximize strength with 7GA steel plate, solid welded 1.50 X .120 tube, and added hi lift mounting points make this rocker the tool of choice when you know you are gonna be laying it on the rocks.
The corner guards add additional strength by plating the weak sheet metal with thick 7GA hot rolled steel and have the rear flare mounting hardware built right in and allows for 35” tires on a stock TJ Wrangler with no rubbing.
The corner guards fit cleanly and provides additional tire clearance by opening up the stock wheel well. The corner guards integrate with the MetalCloak rocker rails creating one solid unit of protection.
The MetalCloak rear flare provides 6" of tire coverage from the tub and is made of strong 1 1/2" x .120 steel tubing, attached with 12GA steel mounting plates and provides the most tire clearance in the industry.
The ball lock gives quick mount/release ability to allow install or removal of the flares easily from the fenders and corner guards, providing maximum clearance or keep them installed for tire coverage. The approach and departure angles are engineered for the best object deflection you can get.
Note: The Dual Function LED Marker Lights and Low Profile LED Marker Lights are sold separately.
Note: The ball ends are for look only. Unlike the MetalCloak flares, the rocker rail steps are not removable.
Note: This system comes in raw and black powdercoat.
[click for less...]
VIDEOS
MetalCloak's Jeep Wrangler TJ/LJ Body Armor
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Introducing MetalCloak Fenders
Everything you ever wanted to know about MetalCloak's benchmark products the Arched Tube Fenders and Overline Tube Fenders.
MetalCloak Rocker Rails
Rockers are one of the most important body armor components you will install in your Jeep.
Black Powdercoat
MetalCloak's Premium Black Textured Powdercoat process is detailed in this updated video.
THE TECH
TJ/LJ Arched Tube Fenders
Most Tire Clearance in the Industry.
Gain more tire clearance for a true low center of gravity build!
True Low Center of Gravity Builds - Play around with 35s on a Stock TJ or Krawl Hard with 37s on a 3" lift!
Gain Highline Kit clearance without Hacking or Replacing your Hood. No hacking your Stock Fenders like other tube fenders require. Set them aside or resell them
Uses Stock Battery & Air Box! No need to buy a replacement battery or air box like other companies require.

Replacement Inner Fender Wells

The replacement inner fender wells are made of lightweight aluminum, fits perfectly into place, and designed to allow more tire clearance when wheeling.
- TJ/LJ Specific CAD Design
- Laser Cut For Perfect Fitment
- Additional Tire Clearance Over Plastic
- Heat Dissipating 1/16" Aluminum
- Driver & Passenger Side Pieces
Replacement Battery Brackets
MetalCloak provides replacement battery brackets allowing for more turning radius to help prevent rubbing. The battery brackets are made of strong 11GA steel, allows use of the stock battery and air box, and is finished in our signature gold zinc chromate to help protect it against the elements.

Most Tire Clearance (Stock Vs MetalCloak)
Clearance is not just about what is ABOVE your tire, it is also what is BEHIND your tire. And compared to other typical tube fenders, we can't be beat:
• 2.6" ABOVE tire vs. Typical Tube Fenders • 5.1" ABOVE tire vs. Stock Flares• 5" BEHIND tire vs. Typical Tube Fenders • 6.5" BEHIND tire vs. Stock Flares


Most Turning Clearance


The Proof

These diagrams silenced the critics and proved that MetalCloak truly was the best in the industry.
Here they are shown with the Overline Tube Fender, but the results are similar for the Arched.
Read this article in Four Wheeler Magazine that details the ease of installation for the MetalCloak tube fenders!
Integrated LED Marker Lights
Every detail has been addressed
MetalCloak's fenders are about clean lines and great fitment; it continues down to the last details.
Attachment points for our Dual Function LED Marker Lights or Low Profile LED Marker Lights are seamlessly integrated into the fender and out of harm's way, perfectly complimenting the styling with purpose and safety.
The LED Marker Lights are Sold Separately.

6" Arched Front Flares

Keep them on for protection on the trail or the street, or remove them in minutes for those tight, narrow runs.
Easily release the two Ball Lock Joints with an allen wrench and two 18-8 Stainless Steel bolts.
The most tire clearance in the industry, covering 35s on a stock TJ!
Best object deflection angle and turning clearance in the industry!
Strength by Coverage By Desgin
Our signature Quick Release "Ball Lock Joint" keeps trail stresses on the rigid joint and not on the bolt.

Object Deflection & Turning Clearance


The Proof

These diagrams silenced the critics and proved that MetalCloak truly was the best in the industry.
Here they are shown with the Overline Tube Fender, but the results are similar for the Arched.
Read this article in Four Wheeler Magazine that details the ease of installation for the MetalCloak tube fenders!
TJ Rocker Rails
The Only Truly Integrated Rocker.
No body modification, cutting or welding needed; just drill a few holes and bolt on the MetalCloak rocker rail.
With a built-in step, deflector plate and hi-lift mount, the rocker rail for the TJ Wrangler protects and serves like no other.

Fully Integrated


Built For Abuse

The rocker rail has a built-in Hi-Lift point to make those critical repairs that much easier.
Always use extreme caution when lifting your Jeep.
TJ Full Corner Guards
Corner Guards, designed to mount the quick release flares.
7GA Hot Rolled Steel Plate creates a bullet-proof second skin for your Jeep.
Quick release flares available in 1½" Rub Rail, 4", 6" or 8".
Allows for up to 35's comfortably on a stock TJ with no rubbing.
Fully integrates with the MetalCloak body armor system.

Maximizing Clearance
Simply cutting 1.5" from behind your tire maximizes clearance allowing for 35s on a stock TJ Wrangler.
The Corner Gaurds alone give you more clearance than stock.


Integrated Body Armor, Full Protection!
Corner Guards integrate with our Rocker Rail creating one solid unit of protection.
Full wrap-around corner guards fit easily on a stock Jeep.


TJ/LJ/YJ/CJ Rear Flares

Easily release the two Ball Lock Joints with an allen wrench and two 18-8 stainless steel bolts.
The most tire clearance in the industry, covering 35s on a stock TJ!
Fully integrates with the MetalCloak body armor system.
MetalCloak vs. Stock
Three mounting options:
- Corner Guard
- Mounting Base Plate in Stock or Mod-Cut
- Generic Corner Guard Adapter Kit

Maximum Strength

Our signature quick release "Ball Lock Joint" keeps trail stresses on the rigid joint and not on the bolt.
Coverage By Design


What's In The Kit?
- Arched Fenders
- Replacement Inner Fender Wells
- Replacement Battery Brackets
- Access Panels
- Arched 6" Front Flares
- Rocker Rails
- Full Corner Guards
- Backing Plates
- 6" Rear Flares
- All Required Hardware

TECHNICAL SPECIFICATIONS
Items | Details |
---|---|
Compatibility | 1997 - 2006 TJ Wrangler |
Driver & Passenger Fenders |
11GA Steel Plate 1 1/2" x .120 Steel Tubing |
Replacement Inner Fender Wells | 1/16" Aluminum Plate |
Replacement Battery Brackets | 11GA Cold Rolled Steel Plate |
Access Panels | 1/16" Aluminum Plate |
Driver & Passenger Flares |
1 1/2" x .120 Steel Tubing 12GA Cold Rolled Steel Plate Solid Steel Ball Ends |
Driver & Passenger Rocker Rails | 7GA Hot Rolled Steel Plate 1 1/2" x .120 Steel Tubing Solid Steel Ball Ends |
Driver & Passenger Corner Guards | 7GA Cold Rolled Steel Plate |
Driver & Passenger Rear Flares | 1 1/2" x .120 Steel Tubing 12GA Cold Rolled Steel Plate Solid Steel Ball Ends |
Steel Coating |
Raw Black Powdercoat |
IMPORTANT NOTES
Marker Lights: The Dual Function LED Marker Lights and Low Profile LED Marker Lights are sold separately.
Rocker Ball Ends: The ball ends are for look only. Unlike the MetalCloak flares, the rocker rail steps are not removable.
Finish: This system comes in raw and black powdercoat.
INSTALLATION
Installation Difficulty | Easy |
Body Modification | Some Drilling |
Time to Install | 15 - 20 Hours |
Installation Instructions | Click Here to see a full list of MetalCloak Installation Instructions. |