JK/JL/JT Steering Stabilizer Billet Mount - Fits Updated 1.625" (1 5/8") Tie Rod
Billet Steering Stabilizer Mount for the Jeep JK & JL Wranglers and JT Gladiator tie rod. The aluminum billet clamp fastens securely to 1.625" OD diameter tie rod.
Features Include:- CNC Aluminum Billet
- Two Piece Design
- Recessed Bolt Locations
- Laser Engraved "M" Logo
- Black Anodized Finish
- All Hardware Included
The two piece aluminum billet design is simple to install and allows you to position the stabilizer for maximum performance. Finished in anodized black with a laser engraved "M" around the recessed bolt holes for a clean and custom look.
Note: This does NOT work with factory tie rod.
Note: The billet tie rod mount ONLY fits MC JK tie rods purchased after July 2020. If you have purchased a tie rod before July 2020 the billet tie rod mount will not fit.
Note: Designed to be used with the RockSport steering stabilizer.
Note: MetalCloak highly recommends using anti-seize on all bolts.
Note: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
[click for less...]
VIDEOS
MetalCloak's Jeep Suspension.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Steering Stabilizer Billet Mount
Billet Steering Stabilizer Mount for the Jeep JK & JL Wranglers and JT Gladiator tie rod. The aluminum billet clamp fastens securely to 1.625" OD diameter tie rod.
What is Corner Travel Index?
Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the county collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
FMVSS 126 Compliant
MetalCloak not only has the best off road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
THE TECH
Steering Stabilizer Billet Mount (1 5/8" Tie Rod)
Billet Tie Rod Mount
The MetalCloak Billet Steering Stabilizer Tie Rod Mount is designed for the MetalCloak JK Wrangler, JL Wrangler & JT Gladiator Tie Rod. The billet clamp is fitted for 1.625" outer diameter.
- CNC Aluminum Billet
- Two Piece Design
- Recessed Bolt Locations
- Laser Engraved "M" Logo
- Black Anodized Finish
What's In The Kit?
- Tie Rod Billet Mount
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2007 - 2018 JK Wrangler | 2018 + JL Wrangler | 2019 + JT Gladiator |
| Billet Mount | 2" X 3" 6061-T6 Aluminum |
| Steel Coating | Black Anodize |
IMPORTANT NOTES
JK Tie Rods: The billet tie rod mount ONLY fits JK tie rods purchased after July 2020. If you have purchased a tie rod before July 2020 the billet tie rod mount will not fit.
Steering Stabilizer: Designed to be used with the RockSport steering stabilizer.
Anti-Seize: MetalCloak highly recommends using anti-seize on all bolts.
Vehicle Alignment: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
INSTALLATION
| Installation Difficulty | Easy |
| Body Modification | None |
| Time to Install | 1 Hour |
| Installation Instructions | Click Here to see a full list of MetalCloak Installation Instructions. |
