RockSport Steering Stabilizer Kit, JK Wrangler
MetalCloak's RockSport Steering Stabilizer Kit for the Jeep JK Wrangler provides the needed additional valving for your lifted Jeep with easy to install relocation brackets.
- 3/16" Steel Plate Axle Side Stabilizer Relocation Bracket
- RockSport Specifically Tuned Steering Dampener
- All Mounting Hardware
The RockSport steering stabilizer/damper has increased compression and extension damping performance over the original equipment.
This improved performance will assist in the overall ride and control of your Jeep.
Note: The RockSport steering stabilizer kit works with Left Hand Drive applications only.
Note: Raised steering stabilizer requires at least 2” of bump stop to clear frame.
[click for less...]
MetalCloak's Jeep JK Wrangler Suspension.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
RockSport Steering Stabilizer
Designed for on and off-road use this product has been specifically engineered for the rigors of larger tires and Jeeps with lift suspensions
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc
What is Corner Travel Index?
Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the county collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
FMVSS 126 Compliant
MetalCloak not only has the best off road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
RockSport Steering Stabilizer
Designed for the rigors of a lifted Jeep that is equipped with over sized off-road tires, the ROCKSPORT STEERING STABILIZER is a fantastic upgrade for Jeeps that stay on the road or go all out when off-roading.
This will reduce the damaging vibration that shortens the life of ball joints, bushings, and other front end components.
The MetalCloak JK Steering Stabilizer, Axle Side Mount relocates the axle side of the steering stabilizer to better protect the steering stabilizer from debris by moving the stabilizer up and out of harms way from where the factory steering stabilizer is mounted. Simple to install using existing factory holes for a bolt on application.
Steering Stabilizer Axle Side Mount
What's In The Kit?
- RockSport Steering Stabilizer
- Steering Stabilizer Mount
- All Required Hardware
|Compatibility||2007 - 2018 JK Wrangler|
|Stabilizer Mount||3/16" Hot Rolled Steel Plate|
|Stabilizer Valving||9 Stage Coil Spring|
|Stabilizer Piston Rod||14mm (stronger than stock)|
|Stabilizer Elastomer Dust Boot||Protects from stone damage|
|Stabilizer Piston & Bore||35mm (increased oil volume)|
|Stabilizer Lip Seal||Multiple Seal (prevents oil loss)|
|Steel Coating||Gold Zinc|
Left Hand Drive: The RockSport steering stabilizer kit works with Left Hand Drive applications only.
Clearance: Raised steering stabilizer requires at least 2” of bump stop to clear frame
|Time to Install||1 Hour|
|Installation Instructions||Click Here to see a full list of MetalCloak Installation Instructions.|