It's Your Jeep, Only Better
Rear Sway Bar Drop Bracket Kit, JK Wrangler, 4.5" Lift
Product ID:
7240
MetalCloak JK Wrangler Rear Sway Bar/Drop Bracket kit is designed to provide additional clearance for lifts 4.5 or higher, that is needed to fit 6Pak™ Shocks when re-using the factory/stock muffler.
Features Include:
Note: This is generally not required if you have an AFTERMARKET muffler. [click for less...]
Features Include:
- Extended Sway Bar Links To 14.5"
- Rubber Boot Seal
- Designed For MetalCloak 4.5" & Up Lifts
- 7GA Hot Rolled Steel Drop Brackets
- 4in Drop For Sway Bar For 6Pak Shock Body Clearance
- Gold Zinc Plated
- Simple Installation
- All Required Hardware
- Made in the USA
Note: This is generally not required if you have an AFTERMARKET muffler. [click for less...]
Availability:
Usually Ships in 2-3 Days
Price As Configured:
$99.00
VIDEOS
MetalCloak's Jeep Wrangler Suspension.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
FMVSS 126 Compliant
MetalCloak not only has the best off road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
THE TECH
4" Rear Sway Bar Drop Bracket
For use with MetalCloak 3.5" lift kits on Jeep JK Wranglers with STOCK exhaust and muffler set-ups.
No need to use if you have an aftermarket muffler or exhaust.
Sway Bar End Links 14.5"
Bolts in place with no cutting or modification required.
- Extended to 14.5"
- Simple installation
- Fit and Finish of an OE Product
- Rubber Boot Seal
- Works with the MetalCloak 5.5" Lift
- Gold Zinc Plated
4" Rear Sway Bar Drop Bracket
- 4" Rear Drop Brackets
- Sway Bar End Links
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2007 - 2018 JK Wrangler |
| 4.5" Drop Bracket | 7GA Hot Rolled Steel |
| Sway Bar End Links | 1/2" - 13 Steel |
| Steel Coating | Gold Zinc |
IMPORTANT NOTES
Exhaust: Do not use if you have an aftermarket muffler.
INSTALLATION
| Installation Difficulty | Easy |
| Body Modification | None |
| Time to Install | 30 Minutes |
| Installation Instructions | Click Here to see a full list of MetalCloak Installation Instructions. |
Write Your Own Review
(C) Copyright 2020, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.