Due to the Ongoing COVID-19 National Crisis, Estimated Shipping Times Will Be Delayed Approximately 3-4 Weeks.
Learn More Here. We appreciate your patience and support and hope you and yours are doing well.

JK 4-Door Pro Adventure Rack System

The 4-Door Pro Rack is a most capable carrying system available for the Jeep Wrangler. The only rack Designed so the hardtop may be taken off or on without removing. The Highest payload, strength, rigidity, and stability as well as an assortment of unique modifications are feature characteristics of this cargo management system.

Pro Rack Features Include:
  • Remove Hard Top Without Removing Rack
  • Heavy Duty 2" Tubular Exo-Skeleton Rack System
  • One Piece Design Front Hoop
  • Front Hoop Weld on Grab Handles
  • 4-Door Pro Roof Rails
  • CNC Clamps with Threaded Bolt Holes
  • Specific Engineered Tube Bend for a Stronger & Sturdier Support Structure
  • Two Piece Design Rear Hoop
  • 1/4" Steel Frame Mounts
  • 7GA Steel Hard Top Rear Adapter Brackets
  • Two Piece NVH Hi-Durometer Urethane Bushings
  • Allows for Freedom Top Removal
  • Industrial Grade Corrosion Resistant Hardware
  • Protection for Windshield Assembly
  • Protection for the Rear Corners
  • Low Profile Design
  • Bolts Directly to Factory Locations
  • No Drilling or Body Modifications Required
  • 850lbs Static Load Capacity
  • 375lbs Dynamic Load Capacity
  • Accessories Mount Directly to Rack System
  • Front Hoop Mount Ready for KMS Kat-Walk
  • Works with the Mod Rack Stealth & Mod Rack Expanded Platforms
  • Finished in Black Texture Powdercoat
  • Quick & Easy Installation
  • Made in the USA
The front light bar hoop mount is a one-piece design and is made of strong [click for more...] 2” diameter steel tube. The hoop is a solid anchoring point for accessories and provides protection for the window assembly.

The light bar pro front hoop comes with industrial grade corrosion resistant hardware, is finished in our signature black powdercoat to protect it against the elements, and has convenient integrated 1” tube handles for additional safety and provide easier access to the kat-walk accessory and the roof rack.

The pro roof rails are made of strong 2” diameter steel tube and have engineered front bends creating a stronger and sturdier support when out on the trails or on the road. The roof rails have a low profile design that keeps the loaded rack with the lowest center of gravity possible when loaded. Rack supports (375lbs dynamic) and allows for a load capacity of 850lbs (static).

The rails are equipped with CNC steel billet clamps that are secured to the front and rear hoop mounts with corrosion resistant hardware. The rails are finished in a durable black texture powdercoat to protect them against the elements and to keep them looking good.

The rear hoop mount is a two-piece design and is made of strong 2” diameter steel tube and the billet ends are secured with industrial grade corrosion resistant hardware. The rear hoop is black powdercoated to protect the hoop from the elements and uses a noise vibration dampening, two-piece hi durometer urethane bushing to prevent squeaks and rattling when out on the trail.

The rear hoop comes with the Pro Rack Hard Top Rear Adapter Bracket. The adapter bracket is made of 7GA hot rolled steel, raises the rear hoop and spreader bars to clear the factory hard top with no contact, and allows enough room to remove the freedom top without having to remove the rack system.

The rear mounting bracket for the JK rear hoop mount to factory locations at the frame and do not require any drilling or body modifications. The rear frame brackets are CAD formed, laser cut, and made of 1/4” hot rolled steel with an added gusset providing incredible strength and stability for the rack system.

Note: The rear pro hoop kit is designed for a low profile, close fitment to the factory hard top. Factory soft top applications require the rear adapter bracket (R55029) for proper clearance.

Note: The Mod Rack Stealth (R55060) and the Mod Rack Expanded (R55075) Platforms are sold separately.

Note: The front hoop Kat-Walk (R60255) is sold separately.

[click for less...]
Price As Configured:
$1,139.00
Bread Checkout
 

VIDEOS

Jeep JK Wrangler Adventure Rack Systems

Black Powdercoat

MetalCloak's Premium Black Textured Powdercoat process is detailed in this updated video.

THE TECH

Hard Top Removal

The 4-Door Pro Rack is a most capable carrying system available for the Jeep Wrangler. The only rack designed so the hard top may be taken off or on without removing.

Simply remove the mounting hardware for the hard top and slide it off; no alterations to the rack system needed.

Hard Top Removal

Front Hoop Light Bar Pro

Front Hoop One Piece Design

The front light bar hoop mount is a one-piece design and is made of strong 2” diameter steel tube. The hoop is a solid anchoring point for accessories and provides protection for the window assembly.

Integrated Weld-On Handles

The front hoop light bar pro has welded-on 1" x .120 wall steel tube handles that let you get up and into your Jeep and also provide easy access to the optional kat walk accessory or roof rack.

Integrated Weld-On Handles

Factory Mounts

Corrosion Resistant Hardware

The front hoop bolts directly to the front window assembly via factory attachment points for maximum strength. The hoop requires no drilling or body modification and is secured into place using industrial grade corrosion resistant hardware.

Front Hoop Finishing Caps

The front hoop 2" steel tube is finished with a heavy duty finishing cap to prevent moisture from getting into the tube and causing internal rust.

KMS Front Hoop Finishing Caps

Mounting Pod Lights

Pod Lights

The front hoop allows pod lights to mount directly to the hoop.

Rear Pro Hoop Kit

The rear hoop is made of strong 2" x .120 wall steel tube and mounts directly to the frame and provides superior off-road protection for the rear corners of the JK Wrangler. The rear hoop is black powdercoated to protect the hoop from the elements and does not require any drilling or body modifications.

KMS Rear Pro Hoop Kit

Shelf-Lock Billet Connectors

KMS Rear Hoop Two Piece Design

Shelf-Lock Billet connections allow for ease of installation and increased functionality.

The rear hoop connects to the rear uprights with solid billet, overlapping Shelf-Locks and secure into place with industrial grade corrosion resistant hardware.

The Billet Shelf Lock connectors are fully welded into the tubes for incredible strength and help facilitate ease of assembly.

Hard Top Adapter Brackets

The rear hoop comes with the Pro Rack Hard Top Rear Adapter Bracket. The adapter bracket is made of 7GA hot rolled steel, raises the rear hoop and spreader bars to clear the factory hard top with no contact.

KMS Hard Top Adapter Brackets

Noise Vibration Dampening Bushings

KMS Two Piece Bushing

The rear hoop uses a noise vibration dampening, two-piece hi durometer urethane bushing to prevent squeaks and rattling when out on the trail.

Frame Mounting Brackets

The rear mounting bracket for the JK rear hoop mount to factory locations at the frame and do not require any drilling or body modifications. The rear frame brackets are CAD formed, laser cut, and made of 1/4” hot rolled steel with an added gusset providing incredible strength and stability for the rack system.

Frame Mounting Brackets

4-Door Pro Roof Rails

4-Door Pro Roof Rails

The Jeep Wrangler 4-Door JK Pro Roof Rails are used as part of our modular roof system. The roof rails integrate with the front and rear hoops to create a rigid and stable cargo management system. The rails are finished in a durable black texture powdercoat to protect them against the elements and to keep them looking good.

CNC Billet Clamps

The rails are equipped with CNC steel billet clamps that are secured to the front and rear hoop mounts with corrosion resistant hardware and has a clamping force of 800lbs!

KMS Pro Rails CNC Billet Clamps

Engineered Bend

KMS 4-Door Pro Roof Rail Engineered Bend

The pro roof rails are made of strong 2” diameter steel tube and have engineered front bends creating a stronger and sturdier support when out on the trails or on the road.

Low Profile Design

The roof rails have a low profile design that keeps the loaded rack with the lowest center of gravity possible when loaded. Rack supports (375lbs dynamic) and allows for a load capacity of 850lbs (static).

KMS 4-Door Pro Roof Rails Lo Profile Design

Compatable Platforms

The pro rails allow platforms to be mounted such as the Mod Rack Stealth and the oversize Mod Rack Expanded along with a multitude of accessories to customize your system to fit your specific needs.

The platforms are sold separately.

Mod Stealth Rack Mod Expanded Rack

Optional Front Hoop Kat-Walk

KMS Kat Walk

The JK Wrangler Jeep Kat-Walk is a non-slip step platform that provides easy access to the top of the Jeep. The KMS Kat-Walk is a bolt-on accessory that spans the windshield/hood area of JK that attaches to front hoop and is rated for 300lbs.

The Front Hoop Kat-Walk is sold separately.

What's In The Kit?

  • Front Hoop Light Bar Pro
  • Front Hoop Finishing Caps
  • Rear Hoop
  • Rear Frame Mount Brackets
  • Hard Top Rear Adapter Brackets
  • NVH Urethane Bushings
  • Pro Rails
  • Billet Clamp Ends
  • All Required Hardware
Whats in the Kit

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2007 - 2018 4-Door JK Wrangler
Front Hoop 2" X .120 Wall Steel Tube
Integrated Handle 1" X .120 Wall Steel Tube
Rear Hoop 2" X .120 Wall Steel Tube
Rear Frame Mount Brackets 1/4" Hot Rolled Steel
Rear Adapter Brackets 7GA Hot Rolled Steel
Bushings Hi-Durometer Urethane Bushings
Pro Roof Rails 2" X .120 Wall Steel Tube
Clamps 3" X .50 Wall Mild Carbon Steel
Steel Coating Black Powdercoat


IMPORTANT NOTES



Soft Top: The rear pro hoop kit is designed for a low profile, close fitment to the factory hard top. Factory soft top applications require the rear adapter bracket (R55029) for proper clearance.

Platforms: The Mod Rack Stealth (R55060) and the Mod Rack Expanded (R55075) Platforms are sold separately.

Kat-Walk: The front hoop Kat-Walk (R60255) is sold separately.

INSTALLATION



Installation Difficulty Easy
Body Modification None
Time to Install 3 - 4 Hours
Installation Instructions Click Here to see a full list of MetalCloak Installation Instructions.


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account