METALCLOAK VIDEO: Feature Product: MetalCloak JK Wrangler Duroflex Control Arms
The MetalCloak JK Wrangler Duroflex Control Arms are a purpose-built suspension upgrade that improve ride quality, increase off-road articulation, and reduce wear through a combination of heavy-duty DOM steel construction, high-clearance lower bends, forged adjustable ends with higher fatigue strength, and MetalCloak’s patented Duroflex self-centering bushings. These bushings provide 360 degree rotation, dampen micromotions, allow up to 34 degrees of self-centering misalignment per end, and are made with vulcanized elastomer reinforced with DuPont Kevlar for long life and easy rebuildability. Finished in a gold zinc chromate, the control arms are designed for durability, performance, and straightforward installation.
Complete Transcript with Time Stamps:
[00:00] Looking for a smoother ride in your Jeep that also adds additional off-road performance?
[00:04] Hi, I'm Scott Becker with MetalCloak here to tell you about our Duroflex Control Arm Set for the JK Wranglers.
[00:08] Our Duroflex Control Arms represent one of our patented products that has set the high mark for quality, proving they are one of the best choices for replacement control arms for your JK.
[00:16] MetalCloak Front Upper Control Arms are made from strong 1.25" DOM steel, and the lowers are beefed up at an 1.5" diameter for all the strength you're going to need.
[00:22] The lower control arms feature high clearance bends that are engineered for maximum up and down travel.
[00:26] Our control arms also feature forged adjustable threaded ends that give a 37% higher fatigue strength over inferior cast parts.
[00:31] This extra rock bashing strength will hold up to whatever you throw at them.
[00:34] Many manufacturers build their control arms misaligned at the joints when mounted.
[00:37] This can cause premature wear and stresses on the brackets.
[00:40] MetalCloak's Duroflex Joints are aligned and centered, and this helps reduce wear and improves performance.
[00:45] MetalCloak Control Arms are equipped with our patented Duroflex self-centering bushings and are capable of rotating 360 degrees, all while dampening micromotion vibrations.
[00:50] And the difference is felt immediately.
[00:52] Duroflex Joints allow for 100% rotation and maximum misalignment for articulation, capable of up to 34 degrees of self-centering misalignment for each end, equaling over 68 degrees of total misalignment.
[00:58] That prevents any binding in the system.
[01:00] Duroflex Bushings share suspension movement evenly between each side of the control arm, equally distributing the force loads.
[01:05] Unlike typical joints, the Duroflex Bushing is low maintenance, vulcanized elastomer with a long-lasting durability and are easily rebuildable when the time comes.
[01:12] The Duroflex Bushings are made strong with DuPont Kevlar fiber, providing even more strength, durability, and performance.
[01:16] MetalCloak's control arms are treated with our durable signature gold zinc chromate finish to keep them looking good and with our detailed instructions you can have them installed quickly and easily.
[01:24] So when you're ready to upgrade your control arms, get the suspension you deserve with the Duroflex Control Arms that are equipped with our patented game-changing Duroflex Bushings only available at MetalCloak.
[01:30] MetalCloak, it's your Jeep, only better.
For more information about this kit CLICK HERE.