OverCab Pro Rack System | JT Gladiator

The OverCab Rack is the most capable carrying system available for the Jeep JT Gladiator. The highest payload, strength, rigidity, and stability as well as an assortment of unique modifications are feature characteristics of this cargo management system.

Features Include:
  • Allows for Freedom Top Removal
  • Bolts Directly to Factory Locations
  • Heavy Duty 2" Tubular Exo-Skeleton Rack System
  • 300lb Dynamic Weight and 600lb Static Load
  • One Piece Front Hoop Design
  • Front Hoop Weld on Grab Handles
  • Front Steel Pier Plates
[click for more...]
  • Integrated Fastener System
  • Rear Steel Flexural Footings
  • Two Piece NVH Hi-Durometer Urethane Bushings
  • 3/16" Steel Base Anchors
  • Roof Trusses
  • CNC Clamps with Threaded Bolt Holes
  • Specific Engineered Tube Bend for a Stronger Front Support Structure
  • Industrial Grade Corrosion Resistant Hardware
  • Protection for Windshield Assembly
  • Protection for the Rear Corners
  • Low Profile Design
  • Accessories Mount Directly to Rack System
  • Front Hoop Mount Ready for ARS Kat Walk
  • Finished in Black Texture Powdercoat
  • Made in the USA
The Jeep Gladiator is the Swiss Army knife of trucks, and keeping the truck bed free for toys and other precious cargo is a big plus. The ARS OverCab system is the perfect tool to give you that extra cargo platform, keeping the bed free for mountain bikes, camping gear, building materials, or other daily uses.

ARS has created a structure to safely handle additional cargo loads for your Jeep. Our rack systems are built on a unique floating foundation that separates and distributes weight to the cab and to the bed maximizing structure and support. Utilizing a matrix of 3/16" steel pier-plates, base anchor footings, and 2" diameter steel columns, our system interconnects a framework that allow for "seismic" forces to be handled readily with its unique mechanical advantages.

ARS is the only rack that features a "load bearing" front hoop without the need for additional support; this strength is the bedrock that allows our rack systems to withstand fore and aft thrust, side load forces, and prevents horizontal racking (the twisting/flexing out of a rigid or supportive state). The front hoop columns are attached with 3/16" steel pier-plates that connect to 16 factory steel mounting points along with 2 additional fasteners at the front assembly of the Jeep body, then the pier plates are discretely covered with the factory cowl for a clean OE look.

The rear hoop columns are attached with our 3/16" steel base anchors and flexural footings, that create an understructure connecting the bed of the Jeep to the hoop for the strongest attachment point. The flexural footings coupled to our 2” OD steel support columns through 2-part urethane bushings, providing flexural rigidity between the bed and cab mounts that allow the front and rear foundations to work in unison to support the cargo structure.

Roof trusses are made from strong 2” OD steel tube and are attached with CNC billet clamps to the fore and aft hoop columns. The roof trusses have been engineered with forward slopes to reduce outward forces on the cab mounted hoop columns; the rear facing billet clamps attach directly to the bed mounted rear hoop columns, where any thrust forces are dealt with utilizing our base anchored/flexural footings.

The roof trusses are positioned low, as bowing is not an issue with the colossal strength, ensuring the lowest center of gravity possible when at capacity.

Note: Does NOT fit on JT Mojave.

Note: The front hoop Kat Walk (R75080 / R75085) is sold separately.

Note: The pod light mounts (R75011 / R75012) are sold separately.

[click for less...]


Price As Configured:

$1,917.00

Customize OverCab Pro Rack System | JT Gladiator
Base Option   + $1,917.00

* Required Fields

Bread Checkout
 

VIDEOS

Jeep JT Gladiator Adventure Rack Systems

Who is ARS?

ARS is dedicated to overland cargo management for Jeeps and other adventure vehicles. All of our products are made right here in the USA

OverCab Rack System

The OverCab system for the Jeep JT Gladiator is an amazing product that provides you with more cargo space and allows you to keep the bed of your Gladiator free for other fun toys.

Black Powdercoat

MetalCloak's Premium Black Textured Powdercoat process is detailed in this updated video.

THE TECH

Front Hoop Light Bar Pro

ARS Front Hoop

ARS is the only rack that features a "load bearing" front hoop without the need for additional support; this strength is the bedrock that allows our rack systems to withstand fore and aft thrust, side load forces, and prevents horizontal racking (the twisting/flexing out of a rigid or supportive state).

Integrated Weld-On Handles

The front hoop light bar pro has welded-on 1" x .120 wall steel tube handles that let you get up and into your Jeep and also provide easy access to the optional Kat Walk accessory or roof rack.

Integrated Weld-On Handles

Steel Pier Plates

JT Gladiator Hoop Pier Plates

The Front Hoop Columns are attached with 3/16" Steel Pier-Plates that connect to 16 factory steel mounting points along with 2 additional fasteners at the front assembly of the Jeep body, then the pier plates are discretely covered with the factory cowl for a clean OE look.

Rear Pro Hoop

The rear hoop is made of strong 2" x .120 wall steel tube and mounts directly to the frame while adding protection for the rear corners of the Jeep JT Gladiator. The rear hoop is black powdercoated to protect the hoop from the elements and does not require any drilling or body modifications.

ARS JT Gladiator Rear Pro Hoop

Noise Vibration Dampening Bushings

JT Gladiator Rear Hoop NVH Bushings

The Flexural Footings coupled to our 2”OD steel support columns through 2-part Urethane bushings, providing flexural rigidity between the frame and body mounts that allow the front and rear foundations to work in unison to support the cargo structure.

Roof Trusses

The Jeep Gladiator Roof Trusses are a critical part of the ARS cargo system. The roof trusses are made solid with 2"OD steel tubing that connect with the front and rear hoop columns, and create the most stable cargo management system available. ARS Roof Trusses are finished in a durable black texture powder coat that protect against the elements and to keep them looking good.

ARS JT Gladiator Roof Trusses

Engineered Bend

ARS JT Gladiator Roof Trusses Engineered Bend

To maximize load strength, ARS Roof Trusses are designed with a forward slope that reduce push/load forces on the front body mounted hoop columns.

CNC Billet Clamps

The strong 2” OD steel tube Roof trusses are complimented with huge CNC steel billet clamps that attach firmly with a combined clamping force of over 3,200lbs to the front and Rear hoop columns.

ARS JT Gladiator Roof Trusses CNC Billet Clamps

Low Profile Design

ARS JT Gladiator Low Profile Designs

The roof trusses are positioned low, as bowing is not an issue with the colossal strength, ensuring the lowest center of gravity possible when at capacity.

Tube Diameter - Size Matters

ARS uses 2" diameter tube for maximum strength. Just a simple visual comparison shows the material used for ARS components far surpasses inferior brands.

ARS Rack System Tube Size Typical Tube Rack Tube Size Gobi

Optional Front Hoop Kat Walk

The JT Gladiator Jeep Kat Walk is a non-slip step platform that provides easy access to the top of the Jeep. The ARS Kat Walk is a bolt-on accessory that spans the windshield/hood area of JK that attaches to front hoop and is rated for 300lbs.

The Front Hoop Kat Walk is sold separately.

JT Gladiator Front Hoop Kat Walk

Optional Mounting Pod Lights

Front Hoop With Pod Mounts

The front hoop allows pod light mounting brackets (R75011 / R75012) to mount directly to the hoop.

Pod Light Mounts are sold separately.

What's In The Kit?

  • Front Hoop Light Bar Pro
  • Pier Plates
  • Roof Trusses
  • Rear Hoop
  • Flexural Footings
  • NVH Urethane Bushing
  • Roof Trusses
  • All Required Hardware
ARS JT Gladiator Rear Pro Hoop Kit

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2019 + JT Gladiator
Front Hoop 2" X .120 Wall Steel Tube
Front Hoop Pier Plates 3/16" Hot Rolled Steel
Integrated Handle 1" X .120 Wall Steel Tube
Roof Trusses 2" X .120 Wall Steel Tube
Clamps 3" X .50 Wall Mild Carbon Steel
Rear Hoop 2" X .120 Wall Steel Tube
Rear Hoop Brackets 3/16" Hot Rolled Steel
Steel Coating Hoops & Trusses - Black Powdercoat
Front Hoop Brackets - Gold Zinc


IMPORTANT NOTES



Model: Does NOT fit on JT Mojave.

Pod Light Mounts: The upper pod light mounts (R75011) and lower pod light mounts (R75012) are sold separately.

Kat Walk: Optional Kat Walk available (R75080 / R75085).

INSTALLATION



Installation Difficulty Easy
Body Modification Some Cutting
Time to Install 1 - 2 Hours
Installation Instructions Click Here to see a full list of ARS Installation Instructions.


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account