JT Gladiator 6Pak Shock Upgrade Kit
Ready to get the most out of your MetalCloak Game Changer Suspension? Upgrade from the standard shocks and get the performance of the longest travel shock available anywhere with bolt-on simplicity!
Features Include:- Front & Rear 6Pak Shocks
- Compressed Size Eye to Eye: 13 1/4"
- Extended Length Eye to Eye: 28 1/4"
- Dual Opposing Nitrogen Charged Reservoirs
- Fully Rebuildable (Call about MetalCloak's Rebuild Program)
- Improve Wheel Travel and Ride Quality
- 3/16" Steel Upper Shock Mount Brackets
- Gold Zinc Plated Protection
- Additional Shock Body Clearance
- Additional Ground Clearance
- All Hardware Required
- Easy Installation
- Made in the USA
Each shock is dyno-tested and mounting ends are preset for easy installation. Shocks ship with the JT specific specs so you can be confident that your shocks are ready for your Jeep JT Gladiator.
Shock application is only limited by your knowledge and application. Contact our suspension consultants for assistance on how the 6Pak can be part of your next build.
These beautifully built, CNC formed, 3/16" Steel Plate brackets move the top shock mounting location down and have the correct off-set built in that maximizes clearance for the shock bodies.
Move your shocks down providing clearance from the frame and alleviate interference. This is the perfect mount for long travel shocks like the MetalCloak 15" travel 6Pak shocks without the addition of bulky aftermarket/cut/weld style shock towers. Bolt it on and GO!
Note: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturers warranty.
Note: MetalCloak recommends you have a suspension specialist align your Jeep once MetalCloak suspension is installed.
[click for less...]
VIDEOS
MetalCloak's Jeep JT Gladiator Suspension.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
MetalCloak 6Pak
The shock is no longer the limiting factor in your build.
How to make a MetalCloak Shock
Each 6Pak shock is hand built to exacting standards and then Dyno tested here at MetalCloak in Sacramento California.
Front Upper Shock Mount Kit
A simple, bolt-on, component that moves the upper mounting points down to maximize shock travel. Space your shocks away from the frame and alleviate interference with these shock mounts.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc
What is Corner Travel Index?
Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the county collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
THE TECH
6Pak Shocks
Specifically designed for applications where space is paramount and travel will be maximized. The 6Pak compact shock body extends shafts from both sides of a floating remote reservoir/body providing more extended length than ANY other shock that bolts into factory locations; the long travel capability is contained in the smallest compressed package providing maximum up travel also.
MetalCloak's Floating Shock Body Technology (FST) provides a game-changing platform featuring parallel shafts extending from the 6 tube floating body. The shock is centralized with dual opposed, nitrogen charged reservoirs that give additional cooling capacity along with up to 15 inches of travel.
The compact, compressed body of the 6Pak is small allowing the lower shock attaching points to be trimmed and moved up for additional "under clearance" without sacrificing travel.
Front 6Pak Shock Shown
The shock is no longer the limiting factor in your build.
6Pak Bushing
Now Easier to Install!
Our new fixed bushing is precisely positioned to ensure easy install.
Just put the shock in position and bolt it in.
Prepositioned rubber bushing eyes keep it in place while providing even more NVH protection.
Owner's Guide
Click the image to the right for the 6Pak Owners Guide
Upper Front Shock Mounting Kit
- Upper Front Shock Mounting Kit
- Works with Stock & 6Pak Long Travel Shocks
- Bolt-On (No Welding Required)
- CNC Formed, 3/16" Steel Plate
- Bolts Directly into Factory Locations
- Gold Zinc Plating
What's In The Kit?
- Front 6Pak Shocks
- Rear 6Pak Shocks
- Upper Front Shock Mounts
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2019 + JT Gladiator |
| Upper Front Shock Mounts | 3/16" Hot Rolled Steel Plate |
| Steel Coating | Gold Zinc - Upper Front Shock Mount |
IMPORTANT NOTES
Warranty: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturers warranty."
Alignment: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
INSTALLATION
| Installation Difficulty | Easy |
| Body Modification | None |
| Time to Install | 1 Hour |
| Installation Instructions | Click Here to see a full list of MetalCloak Installation Instructions. |