It's Your Jeep, Only Better

Duroflex Control Arms, JK/JL Wrangler, Lower Rear

The MetalCloak's Lower Rear Duroflex Control Arms [fits the JK Wrangler and New JL Wrangler] are precision engineered for all the flex and the smoothest ride.

Equipped with the trail proven Patent Pending [metalcloakpatents.com] MetalCloak DuroflexTM self-centering bushings at both ends for a combined misalignment of over 76 degrees.

Now made with DuPont™ Kevlar® fiber - the first suspension components manufactured with Kevlar® for industry leading durability.

All parts are treated with Gold Zinc Chromate for the ultimate in defense against the elements.

The easy to install JK Lower Rear Control Arm Kit includes:

Left & Right Side (Driver & Passenger)

  • 2 Lower adjustable rear control arms
  • 4 Duroflex hi-flex, road comfort, joints
  • 2 Lock nuts
  • 8 Retainer Washers
  • 8 C clips
$325.00
Rating:
100% of 100
Availability: Usually Ships in 1 to 2 Weeks
Product Code: 7003
Dividing Line

DUROFLEX 101-EVERYTHING YOU NEED TO KNOW ABOUT THE DUROFLEX JOINT

This short video covers everything you need to know about the basics of the MetalCloak Duroflex Joint.

Check Out the Video>>>

Dividing Line

Q: WHAT IF A CLEVITE JOINT MET A FLEX JOINT IN A BAR...

A: You'd have the key to the MetalCloak Control Arms, the Patent Pending Duroflex™ Joint ( metalcloakpatents.com).

Standard Tube FEnder Clearance

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34˚), Self-Centering, Rebuildable Joint with an OEM quality ride.

OEM Style Clevite Joint Typical Flex Joint MetalCloak Duroflex Joint
  • High Vibration Dampening
  • Self-Centering
  • Fused at Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
  • High Vibration Dampening
  • Self-Centering
  • Fused Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
Dividing Line
THE DUROFLEX JOINT PROVIDES THE BEST RIDE. PERIOD.

High Vibration Dampening & Self Centering...

Made of a Proprietary Rubber Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...

  • The best ride quality
  • No binding of your control arms.
  • None of the micro-wear that DESTROYS Flex Joints

Dividing Line
AT METALCLOAK WE TAKE THE CARE TO BUILD IT RIGHT...
Standard Tube FEnder Clearance

Control Arm Duroflex Joint Alignment...

At MetalCloak we take the care to build every product right.

Most manufacturers build their control arms misaligned from center. Why? It simply costs less to do so.

By not cutting any corners, our joints are Centered and Aligned reducing wear and improving performance.

It makes them easier to install, too!

Standard Tube FEnder Clearance
Duroflex Kevlar Bushing The MetalCloak Kevlar® bushings can be identified by the M located on the surface.

DuPont™ Kevlar® continues to take on new challenges, their scientists are continuously innovating and working on a range of new opportunities through collaborations with communities, industrial manufacturers, and governments. Together we’re bringing the strength, durability and performance of Kevlar® to new frontiers. Kevlar® aramid fiber is pushing boundaries and defying obstacles every day.
Dividing Line

DEGREES OF ARTICULATION...

MetalCloak's Duroflex Joint provides 28˚ more articulation and flex then typical control arms!

Standard Tube FEnder Clearance Standard Tube FEnder Clearance
Dividing Line

CONTROL ARM SPECIFICATIONS

Front Control Arms Rear Control Arms
Castor Angle Lower Upper Lower Upper
JK Factory Control Arms Stock 22 5/8" 18 3/4" 19 3/4" 17 7/16"
JK MetalCloak 2.5 - 3.5" Lift 5 Degrees 23 1/16" 18 3/4" 20 7/16" 18 7/16"
JL Factory Control Arms Stock 24" 20 1/4" 20" 17 1/2"
JL MetalCloak 3.5" Lift 5 Degrees 24" 19 3/4" 20 1/8" 17 1/2"

Note: These Control Arm Specifications are Just Starting Points. ALL JEEPS ARE DIFFERENT. MetalCloak Recommends Seeing a Suspension Specialist for Correct Control Arm Lengths For YOUR Jeep.

JK/JL Wrangler Lower Rear
(SKU #7003)

  • CNC Machined
  • 3/16" Wall DOM Steel
  • 1.5" OD
  • Precision Locking Nut
  • Gold Zinc Plate
  • Duroflex Joint at Both Ends
  • Lengthened 5/8" for Best Axle Position

7003 Specifications

Dividing Line
TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
SHIPPING & MATERIAL SPECIFICATIONS
ItemsMaterials
Control Arms 1 1/2" .187 DOM Steel Tubing
Duroflex Joint Proprietary Vulcanized Rubber made with DuPont™ Kevlar® fiber
Total Weight 20 lbs
Available in Gold Zinc? Yes
Dividing Line
INSTALLATION
Installation Difficulty Easy
Body Modification None
Time to Install 1 Hour
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Icon

INSTALLATION INSTRUCTIONS:

At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Rating:
100% of 100
Write Your Own Review
You're reviewing:Duroflex Control Arms, JK/JL Wrangler, Lower Rear
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.