JL Wrangler | JT Gladiator Front Differential Cover & Skid Kit [ M210 | 3rd Gen D44 ] Rubicon Edition
- Nodular Cast Iron Diff Cover
- Designed with a Recessed Fluid Fill Hole
- 7GA Steel Glide-Skid Mounts to Cover
- Skid Protects Exposed Drain Plug
The differential cover is made of Nodular Cast Iron and is tested to over 20 tons of rock bashing strength. It features a Stylish MetalCloak "M" embossed on the outside, a flush mount fill hole, and built in Glide-Skid mounting locations to install the included 7GA steel Glide-Skid. Glide-Skid covers the exposed factory drain on the bottom of the differential to keep it from getting damaged when dragging it over obstacles; Glide-Skid is finished in gold zinc for superior corrosion protection.
Differential Cover comes raw, no finish-ready for your customization.
Glide-Skid comes in our signature Gold Zinc Chromate.
Note: The MetalCloak Front Dana M210 Differential Cover does not work with the front stock track bar.
Note: The MetalCloak Front Dana M210 (3RD Gen D44) Differential Cover Comes raw with no finish
Note: After installation re-fill to factory oil capacity, See owner’s manual for capacity.
Note: The MetalCloak JL/JT Differential Cover Plate will ONLY work on the front of JL Wrangler and JT Gladiator applications, Rubicon edition for Dana M210 (3rd Gen D44).
[click for less...]
MetalCloak's Jeep JL Wrangler Suspension.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
JL/JT Differential Cover
The MetalCloak Cover Plate is absolute protection for one of the most vulnerable and low hanging areas on your Jeep…the differential.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc
JL Front Differential Cover
- Designed with recessed fluid fill hole
- High recessed Pinion fluid check point
- Designed to take the abuse of the trail
Comes without coating and ready for your custom finish.
JL Front Differential Skid Plate
What's In The Kit?
- Differential Cover
- Differential Skid Plate
- Fluid Fill Hole Plug
- All Required Hardware
|Compatibility||2018 + JL Wrangler Rubicon | 2019 + JT Gladiator Rubicon|
|Differential Cover||Cast Iron|
|Skid Plate||7GA Steel|
|Differential Cover Coating||Raw|
|Differential Skid Plate Coating||Gold Zinc|
Track Bars: The MetalCloak Front Dana M210 Differential Cover does not work with the front stock track bar.
Finish: The MetalCloak Front Dana M210 (3RD Gen D44) Differential Cover Comes raw with no finish
Oil Capacity: After installation re-fill to factory oil capacity, See owner’s manual for capacity.
Compatibility: The MetalCloak JL/JT Differential Cover Plate will ONLY work on the front of JL Wrangler and JT Gladiator applications, Rubicon edition for Dana M210 (3rd Gen D44).
|Time to Install||1 Hour|
|Installation Instructions||Click Here to see a full list of MetalCloak Installation Instructions.|