Due to the Ongoing COVID-19 National Crisis, Estimated Shipping Times Will Be Delayed Approximately 3-4 Weeks.
Learn More Here. We appreciate your patience and support and hope you and yours are doing well.

HD Chromoly Dog-Legged Tie Rod, JL Wrangler/JT Gladiator, Sport

THIS IS ONLY FOR THE NON-RUBICON EDITION!
Chromoly Dog-Legged Tie Rod for the Rubicon JL Wrangler/JT Gladiator is strength with style for your vulnerable steering system.
  • Tubular 1.625”OD .375” wall ID 4130 Chromoly CDS
  • Gold Zinc Chromate Finish
  • 1-Ton Forged Heat Treated Off Set Dog Leg Rod Ends
  • Rod End Design Controls Tie Rod Flop
  • OE Taper Pin and lock nut for Exact Fitment
  • Sealed with Durable Rubber Grease Boots
  • Adjustable While Installed
  • Includes HD Steering Stabilizer Bracket
  • WORKS WITH STOCK WHEEL BACKSPACING!
Exclusive to MetalCloak this [click for more...] tie rod comes with dual 1-ton forged and heat treated 1" Dog-Leg Rod-Ends that have strength AND provides clearance for use with stock or aftermarket wheels - allows the best turning radius possible. Metalcloak dog-legged rod ends control tie rod flop providing better performance. Ends are sealed with grease boots to keep debris out and lubrication in. The adjustable tie rod can be adjusted while installed on the vehicle for fine tuning.

The heavy duty 7GA adjustable steering stabilizer mount bracket installs onto the tie-rod and re-positions the the stabilizer up and out of harms way; the mount is designed for aftermarket steering stabilizers.

The optional billet mount is a two piece aluminum design, is simple to install, and allows you to position the stabilizer for maximum performance. Finished in anodized black with a laser engraved "M" around the recessed bolt holes for a clean and custom look.

Note: Minimum 2" lift required.

Note: The RockSport steering stabilizer kit works with Left Hand Drive applications only.

Note: Will not fit on JT Gladiator with factory wheel backspacing.

Note: Raised steering stabilizer requires at least 2” of bump stop to clear frame.

Note: If purchasing the billet tie rod mount MetalCloak highly recommends using anti-seize on all bolts.

[click for less...]


Price As Configured:

$439.00

Customize HD Chromoly Dog-Legged Tie Rod, JL Wrangler/JT Gladiator, Sport
Base Option   + $395.00

* Required Fields

Bread Checkout
 

VIDEOS

MetalCloak's Jeep JL Wrangler & JT Gladiator Suspension components get you what you need.

Who Is MetalCloak?

MetalCloak creates Game-Changing Products for the Off Road Enthusiast.

Dog-Legged Tie Rod

The Chromoly Dog-Legged Tie Rod for the Jeep JL Wrangler & JT Gladiator is added strength to replace the vulnerable stock tie rod.

Why Gold Zinc?

It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc

FMVSS 126 Compliant

MetalCloak not only has the best off road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.

THE TECH

Chromoly Steel For Added Strength

Making a Tie Rod is easy, but we don't do easy; we chose Normalized 4130 Chromoly 1.625”OD .375” wall tube that can take a beating without breaking (97,200 pound per square inch).

JL Dog Leg Tie Rod

Dog Leg Tie Rod Ends

WORKS WITH STOCK BACKSPACING!

Boot Sealed - Keeps grease in and dirt out

Anti Flop Feature - Precision range of movement

Maximum Tire/Wheel Clearance - Correct steering radius

Massive 1-Ton Rod Ends - Provides additional strength

Over-sized 1 inch threads- More material at critical area
Dog Leg Tie Rod End

JL Specific OE Bolt Taper - Secure mount

Over-Sized, Forged, & Heat Treated Housing - Exclusive

Anti Flop Feature

Anti Flop Feature
This specially designed rod end has been engineered just for the JL Wrangler steering.

Full side to side range of motion ensures bind free steering when pushing the extremes of your Jeeps travel and articulation, while a limited "front to back" range of movement is built into the rod-end and eliminates the possibility of the offset to allow the tie-rod to "flop".

Standard Tie Rod Mount

The MetalCloak Steering Stabilizer Tie Rod Mount will work with the Stock Tie Rod but was designed for the MetalCloak JK Tie Rod.
  • CAD Formed 7GA Hot Rolled Steel
  • Easy Bolt-On Bracket (No Welding)
  • Zinc Chromate Plate
Tie Rod Mount

Billet Tie Rod Mount (Optional)

Steering Stabilizer Tie Rod Mount

The MetalCloak Billet Steering Stabilizer Tie Rod Mount is designed for the MetalCloak JK Wrangler, JL Wrangler & JT Gladiator Tie Rod. The billet clamp is fitted for 1.625" outer diameter.

  • CNC Aluminum Billet
  • Two Piece Design
  • Recessed Bolt Locations
  • Laser Engraved "M" Logo
  • Black Anodized Finish

Steering Stabilizer Mount

The MetalCloak Steering Stabilizer, Axle Side Mount relocates the axle side of the steering stabilizer to better protect the steering stabilizer from debris by moving the stabilizer up and out of harms way from where the factory steering stabilizer is mounted. Simple to install using existing factory holes for a bolt on application. The steering stabilizer axle side mount requires a minimum 2" lift.
Steering Stabilizer Mount

What's In The Kit?

Whats in the Kit
  • Tie Rod
  • Dog Leg Anti Flop Tie Rod Ends
  • Steering Stabilizer Axle Mount
  • Standard Tie Rod Mount or Billet Tie Rod Mount
  • All Required Hardware

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2018 + JL Wrangler Sport | 2019 + JT Gladiator Sport
(Minimum 2" Lift Required.)
Tie Rod 1.625" OD .375" Wall 4130 CDS
Tie Rod Mount 7GA Hot Rolled Steel Plate
Stabilizer Mount 7GA Hot Rolled Steel Plate
Length 59 5/16"
Optional Billet Mount 2" X 3" 6061-T6 Aluminum
Black Anodize
Steel Coating Gold Zinc


IMPORTANT NOTES



Requirements: Minimum 2" lift required.

Tires: Will not fit on JT Gladiator with factory wheel backspacing.

Left Hand Drive: The RockSport steering stabilizer kit works with Left Hand Drive applications only.

Clearance: Raised steering stabilizer requires at least 2” of bump stop to clear frame.

Billet Mount: MetalCloak highly recommends using anti-seize on all bolts.

INSTALLATION



Installation Difficulty Easy
Body Modification None
Time to Install 30 Minutes
Installation Instructions Click Here to see a full list of MetalCloak Installation Instructions.


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account