JL Wrangler HD Control Arm Pro'lignment Kit
MetalCloak's Jeep JL Wrangler Front Control Arm Drop Bracket corrects the control arm angle and caster for 2.5", 3.5", and 4.5" lift heights. Brackets allows the use of factory/non-adjustable control arms or aftermarket adjustable control arms.Features Include:
- Flattened Control Arm Angles
- Corrected Caster
- Improved Braking Performance
- 7GA Fully Welded 1 Piece Design
- Gusseted And Boxed-In For Strength
- Gold Zinc Plated
- Skid Washers
- All Hardware Needed
- Bolts Directly Into Factory Location
- Made in the USA
Multiple hole locations for control arms allow use on lift heights from 2.5" to 4.5" even if re-using factory control arms; this works great with aftermarket control arms also to flatten the angle. Bolts into factory locations for ease of installation and is gold zinc plated for a durable, long lasting finish.
None: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
[click for less...]
MetalCloak's Jeep Wrangler Suspension.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
FMVSS 126 Compliant
MetalCloak not only has the best off road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
Front Control Arm Drop Bracket
MetalCloak’s Control Arm Drop Bracket & Caster Correction Kit is the perfect solution for lifted Jeep JL Wranglers using aftermarket or factory control arms. This product enables the use of OE factory control arms without the need for problematic cam bolts and will flatten out the angle of the arms for better drivability. The entire bracket assembly is welded together for strength and then simply uses factory locations to bolt into place.
What Does It Do?
Adding this Drop Bracket improves front control arm geometry and adjusts front axle caster for lifted JL Wranglers. The benefits are immediately felt with a smoother ride and superior braking performance with less front end dive. Maximize the comfort and performance of your Jeep JL Wrangler with MetalCloak’s Control Arm Drop Bracket/Castor Correction Kit.
But why not recessed bolt holes?
When products are new they fit just fine... now go bash them on the trail and see how they line up, they don't!
In critical areas for attachment that can get misaligned we have encapsulated the head of the bolts with skid guard washers for the bolt head that protects and affords slotted holes to ease re-installation when servicing your Jeep.
What's In The Kit?
- Front Control Arm Drop Brackets
- Bracket Spacers
- Skid Washers
- All Required Hardware
|Compatibility||2018 - Current JL Wrangler|
|Drop Bracket||7GA Hot Rolled Steel|
|Steel Coating||Gold Zinc|
Suspension Alignment: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
|Time to Install||2 Hour|
|Installation Instructions||Click Here to see a full list of MetalCloak Installation Instructions.|