MetalCloak's Jeep JL Wrangler Full Replacement Suspension Hardware Kit for(Control Arm, Track Bar & Shock Mount) Hardware Kit is a 84 piece bolt kit that features replacement hardware for all control arms, front/rear track bars and lower shock mounts.

Features Include:

• Works For JL Wranglers
• Control Arm Hardware
• Grade 8 Bolts (18)
• Washers (34)
• Nuts (16)
• Flag Nuts (6)
• Track Bar Hardware
• Grade 8 Bolts (4)
• Washers (4)
• Shock Mount Hardware
• Grade 8 Bolts (2)
• Washers (2)
• Gold Zinc Hardware

Full Replacement Suspension Hardware Kit from MetalCloak is what you need to replace [click for more...] your worn out fasteners. MetalCloak's Patented Duroflex Control Arms do not put the stresses on stock hardware like typical suspension kits do, so it is possible to re-use all your stock hardware. If your JL has old, worn out, or mother nature has played havoc with your stock hardware, this kit is your ultimate solution.

Note: This item is considered a builder part, as such there are no instructions for the use of these products; if using any of the builder parts you should be confident of your mechanical skill level and know that you will use at your own risk.

Note: MetalCloak recommends you have a suspension specialist align your truck once MetalCloak suspension is installed.

[click for less...]