It's Your Jeep, Only Better

JK Full Overline System 4 Door

For those who are looking for a full MetalCloak 4-Door Overline Body Armor System, here it is, all in one convenient place.

Save Money Too! We've automatically applied a little discount for you.

This Overline JK System includes: "Aluminum Inner Fender Liners & LED Marker Lights are not included"
Click here to add fender liners to your order now.

Click here to add LED Marker Lights to your order now.

Note: This system comes in Raw and MetalCloak’s Signature Black Powdercoat.

$2,119.00
Rating:
100% of 100
Availability: Raw Metal Usually Ships in 1 - 2 Weeks
Product Code: 3503*
JK OVERLINE FRONT FENDERS

Most Tire Clearance for JK Wranglers. Period.

For the true Low Center of Gravity Builds - Play around with 37s on a Stock JK or Crawl Hard with 40s on a 3.5" lift!

Once again, MetalCloak has redefined the Tube Fender.

The Overline represents the First True Highline Kit for the JK. By redefining the lines of the JK, we've gained extreme clearance for all your off road challenges.

Just remove the Quick Release Flares and use your built-in Rub Rail for grinding on what nature has to offer.

JK no longer stands for Just Kidding.

Overline on TJ
Dividing Line

MOST TIRE CLEARANCE:

MetalCloak's JK Overlines provide the most bolt-on Tube Fender clearance. Period.

  • Over 6" of Additional Clearance vs. Stock JK Fenders

JK Tube Fenders

JK Tube Fenders
OEM Clevite and Typical Flex Joint is the Duroflex Joint
  • 2" of Additional Clearance vs. Typical Tube Fenders - MetalCloak IS Clearance.
JK Tube Fenders JK Tube Fenders
Dividing Line
JK 8" FRONT FLARES

Overline on TJ

The Only Quick Release Jeep Flare!

Keep them on for protection on the trail or the street, or remove them in minutes for those tight, narrow runs.

Easily release the two Ball Lock Joints with an allen wrench and two 18-8 Stainless Steel bolts.

The most tire clearance in the industry, covering 37s on a stock JK!

Best Object Deflection Angle and turning clearance in the industry!

Additional gusset adds even MORE strength!

Overline on TJ

Dividing Line
JK 4 DOOR ROCKER EXOSKIN

That extra layer of protection.

The ExoSkin is a 1/8" steel skin that protects and reinforces the otherwise thin sheetwall of the JK.

Designed to integrate with the JK Rocker Rails, the ExoSkin can also be purchased separately.

JK 4 Door Rocker Exo Skin
Dividing Line
JK 4 DOOR ROCKER RAIL

JK Rocker Rail

The Only Truly Integrated Rocker.

No body modification, cutting or welding needed; just drill a few holes and bolt on the MetalCloak Rocker Rail.

With a built-in step, deflector plate and hi-lift mount, the Rocker Rail for the JK protects and serves like no other.

Combined with the optional Exo-Skins, you have full, rock-biting, functional protection for your rig.

The best object deflection angle!

Dividing Line
JK 4 DOOR REAR BASE PLATE

Rock-Biting Rear ExoSkin, designed to mount the Quick Release Dovetailed Flares.

1/8" Cold Rolled Steel Plate creates protection and the ability to add a Rear Flare.

The weak body of the JK requires the use of the rear ExoSkin so that we can raise the Dovetailed fender and gain all that additional clearance!

Just enough tire clearance, allowing for 37's on a stock JK!

Fully integrates with the MetalCloak body armor system.

Dividing Line
QUICK RELEASE 6" REAR TUBE FLARES, JK

4 Inch Rear TJ Flares

The Quick Release Jeep Rear Fender Flare!

Keep them on for protection on the trail or the street, or remove them in minutes for those tight, narrow runs.

Easily release with two Ball Lock Joints and two 18-8 SS bolts.

Dovetailed for the best Object Deflection Angle.

The most tire clearance in the industry, covering 37s on a stock JK!

Fully integrates with the MetalCloak body armor system.

Dividing Line
OPTIONS:
Raw Metal Premium Black Textured Powdercoat
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two to three weeks. Check out our video on how we powdercoat.
Tube Fender Preparation
Dividing Line
SHIPPING & MATERIAL SPECIFICATIONS
ItemsMaterials
Driver & Passenger Fenders 10GA Cold Rolled Steel Plate
1 1/2" .120 Steel Tubing
Fender Brackets 1/8" Aluminum Plate
Driver & Passenger Flares 12GA Cold Rolled Steel Plate
1 1/2" .120 Steel Tubing
Solid Steel Ball Ends
Driver & Passenger Rocker Exo-Skins 11GA Cold Rolled Steel Plate
Driver & Passenger Rockers 7GA Hot Rolled Steel Plate
1 1/2" .120 Steel Tubing
Solid Steel Ball Ends
Driver & Passenger Rear Exo-Skins 1 1/2" .120 Steel Tubing
Solid Steel Ball Ends
Driver & Passenger Flares 12GA Cold Rolled Steel Plate
1 1/2" .120 Steel Tubing
Solid Steel Ball Ends
Total Weight 268 lbs
Available in Raw? Yes
Available in Black Powdercoat? Yes
OEM Clevite and Typical Flex Joint is the Duroflex Joint
INSTALLATION
Installation Difficulty Easy - Bolt On
Body Modification Some Drilling
Time to Install 15 - 20 Hours
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Icon

INSTALLATION INSTRUCTIONS:

At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Rating:
100% of 100
Write Your Own Review
You're reviewing:JK Full Overline System 4 Door
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.