JK/JKU Wrangler Molded Housing, Rear ExoSkin & ExoCorner Kit, Pair
The Rear ExoSkin & ExoCorner Kit provides protection for the vulnerable corner of your Jeep JK/JKU Wrangler. This system replaces the dim factory taillights with Hi-Visibility/Lo-Profile LED taillights mounted in moulded.
Features Include:- 1/8" Cold Rolled Steel ExoSkins
- 1/8" Steel Rear ExoCorner Plates
- ExoSkin Mounting Template
- 6061 T6 Aluminum Bar ExoCorner Rails
- Durable Molded ASA LED Housings
- Hi-Vis/Lo-Pro LED Taillight Replacements
- LED Resistors
- Type III Anodized Black Aluminum Finish
- Black Powder Coated Steel Finish
- Easy Installation
- Made in the USA
The housings incorporate low profile led replacement taillights that provide a truly custom upgrade. Hi visibility led panels are much brighter than the dim factory taillights, have reverse LEDS along with side-visible running lights, are SAE/DOT compliant, and fit perfectly into the factory locations. These are a simple replacement for a broken light set or a fantastic upgrade from the "stock" tail-lights.
The Rear ExoSkin & ExoCorner Kit provides resistors to correct and prevent hyper-blinking; this correction retains the turn signals standard/OE flash rate. The added resistors also prevents warning messages from being triggered on the dashboard. The resistors finned, aluminum, heat-sink design helps dissipates heat when in use for long life.
The Rear ExoSkins are made of strong laser cut 1/8" cold rolled steel. MetalCloak provides a full size drilling template to guide your installation and ensure a perfect fit. The Rear ExoSkins are finished in MetalCloak signature black powdercoat.
Note: The rear exoskin and exocorner kit work with both the overland and hardline rear fenders.
Note:This product does not come in raw metal.
[click for less...]
VIDEOS
MetalCloak's Jeep JK/JKU Wrangler Body Armor
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Overland Rear ExoSkins
Rear ExoSkins provide additional strength to the rear of your Jeep and protect the vulnerable sheet metal of the quarter panel of the Jeep.
Rear Molded LED Light Kit
The LED light kit works as a complete lo-profile replacement for the stock taillights.
Black Powder Coat
MetalCloak's Premium Black Textured Powdercoat process is detailed in this updated video.
THE TECH
JK/JKU Rear ExoSkin & ExoCorner Kit
The Rear ExoSkins add protection and strength to the vulnerable rear corners of your JK/JKU Wrangler.
- 1/8" Laser Cut Steel
- Premium Black Texture Powdercoat
- Includes Sheet Metal Drill Template
Additional Information
The Armor Plates and Corner Rails easily secure via Riv-Nut mounts to the Jeep body.
A complete exo-skin drilling template, made of metal, is included to take any guesswork out of drill locations and simplifies the installation.
JK/JKU ExoCorner LED Kit
The ExoCorner is the first Corner Guard for the JK/JKU that requires no cutting of the Jeep body just to make it fit.
1. ExoCorner Rail - T6 Aircraft Grade Aluminum provides over a 1/4" of True Corner Protection.
2. LED Molded Housing - The molded replacement LED housing requires zero body modifications and can be used with or without corner guards; the lights bolt right into the stock light position.
3. LED Taillight -Much brighter than stock lights and have built in reverse lights and side light. The LEDs are SAE/DOT compliant and wire up directly.
4. Rear ExoSkin & Rear Corner Plate - Providing just the right amount of protection while eliminating the need to cut up your Jeep just to make the corner fit.
Stock vs. MetalCloak - Taillight Profile
The molded housings incorporate low profile LED replacement taillights for a truly custom upgrade from stock.
Stock vs. MetalCloak - Taillight Luminosity
Much brighter then stock lights, these LEDs are SAE/DOT compliant and wire up directly.
LED Resistors
The Rear LED Kit provides resistors to correct and prevent hyper-blinking; this correction retains the turn signals standard/OE flash rate. The added resistors also prevents warning messages from being triggered on the dashboard. The resistors finned, aluminum, heat-sink design helps dissipates heat when in use for long life.
What's in the Kit?
- Driver & Passenger Rear ExoSkins
- Rear ExoSkins Template
- ExoCorner Rails
- LED Molded Housing
- LED Taillights
- Resistors
- Resistor Brackets
- Rear Corner Plate
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2007 - 2018 JK Wrangler |
| Rear ExoSkin | 1/8" Cold Rolled Steel |
| ExoCorner Plate | 1/8" Cold Rolled Steel |
| ExoCorner Rail | T6 Aluminum |
| LED Housing | Black Acrylonitrile Styrene Acrylate |
| Steel Coating | Black Powder Coat |
IMPORTANT NOTES
Finish: This system comes in MetalCloak's signature black powdercoat only.
INSTALLATION
| Installation Difficulty | Moderate |
| Body Modification | Some Drilling & Wiring |
| Time to Install | 2 - 3 Hours |
| Installation Instructions | Click Here to see a full list of MetalCloak Installation Instructions. |