JK Wrangler HD Control Arm Pro'lignment Kit
MetalCloak's Jeep JK Wrangler Control Arm Pro'lignment Kit corrects the control arm angle and caster for 2.5", 3.5", and 4.5" lift heights. Brackets allows the use of factory/non-adjustable control arms or aftermarket adjustable control arms.Features Include:
- Flattened Control Arm Angles
- Corrected Caster
- Improved Braking Performance
- 3/16" Hot Rolled Steel Plate
- Fully Welded 1 Piece Design
- Gusseted And Boxed-In For Strength
- Gold Zinc Plated
- All Hardware Needed
- Bolts Directly Into Factory Location
- Made in the USA
Multiple hole locations for control arms allow use on lift heights from 2.5" to 4.5" even if re-using factory control arms; this works great with aftermarket control arms also to flatten the angle. Bolts into factory locations for ease of installation and is gold zinc plated for a durable, long lasting finish.
None: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
[click for less...]
MetalCloak's Jeep Wrangler Suspension.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Control Arm Pro'lignment Kit
MetalCloak's Jeep JK Wrangler Control Arm Pro'lignment Kit corrects the control arm angle and caster for 2.5", 3.5", and 4.5" lift heights.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
What is Corner Travel Index?
Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the county collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
FMVSS 126 Compliant
MetalCloak not only has the best off road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
Control Arm Pro'lignment Kit
MetalCloak’s Control Arm Drop Bracket & Caster Correction Kit is the perfect solution for lifted Jeep JK Wranglers using factory control arms. This product enables the use of OE factory control arms without the need for problematic cam bolts. The entire bracket assembly is welded together for strength and then simply uses factory locations to bolt into place.
What Does It Do?
Adding this Drop Bracket improves front control arm geometry and adjusts front axle caster for lifted JK Wranglers. The benefits are immediately felt with a smoother ride and superior braking performance with less front end dive. Maximize the comfort and performance of your Jeep JK Wrangler with MetalCloak’s Control Arm Drop Bracket/Castor Correction Kit.
What's In The Kit?
- Control Arm Pro'lignment Brackets
- Bracket Spacers
- All Required Hardware
|Compatibility||2007 - 2018 JK Wrangler|
|Drop Bracket||3/16" Hot Rolled Steel Plate|
|Steel Coating||Gold Zinc|
|Time to Install||2 Hour|
|Installation Instructions||Click Here to see a full list of MetalCloak Installation Instructions.|