It's Your Jeep, Only Better

Hardline Tube Fenders, JK Wrangler, Front

JK Wrangler Hardline Tube Fenders give you the quality craftsmanship of MetalCloak Fenders in a more streamlined look and the BEST possible fitment available

At MetalCloak we incorporate a secondary manufacturing process applying a large radius press bend to closer match the factory lines of your Jeep; this additional step allows MetalCloak flares to fit better than any other.

Hardline Flares provide the strength of steel while giving additional tire clearance over the factory plastic parts.

Complete Stock Replacement Fender Kit Includes:

  • Driver & Passenger Fenders
  • All Installation Hardware and Brackets

"Aluminum Inner Fender Liners & LED Marker Lights are not included"
Click here to add fender liners to your order now.

Click here to add LED Marker Lights to your order now.

$489.00
Rating:
100% of 100
Availability: Raw Metal Usually Ships in 1 - 2 Weeks
Product Code: 3205*
Dividing Line
HARDLINE FENDERS, JK FRONT

Increased strength and tire clearance with the best fitment available in MetalCloak Hardline Fenders!

MetalCloak JK Hardline Fenders fit better because of the secondary process that applies a large radius bend to the top of the tubular steel fender; this best follows the lines of the factory Jeep body.

Increase your tire clearance by replacing the factory plastic flares with the strength of STEEL.

Hardline's from MetalCloak are:

  • Increased Tire Clearance
  • Increased Strength
  • Precision Fit
  • Easier to Install
  • Best Quality Craftsmanship
  • A One Piece Fender Solution
  • Made in the USA
Hardline Side View
Dividing Line

CRAFTSMANSHIP LIKE NO OTHER...

The JK Body is notoriously weak. Therefore fender manufacturers must be careful in developing products ensuring they fit precisely and put no undue stress on the vehicle. Unfortunately, many of the JK Fender Manufacturers have ignored this. Below is a comparison of the typical aftermarket JK Tube Fender from a well known manufacturer and the new MetalCloak Hardlines.

Overline on TJ Hardline Fenders JK
Dividing Line
FENDER COMPARISON:

Hardline on JK

Other companies set the top sheet metal over the top of the tube creating an edged or gapped surface, this method is easier for manufacturing.





MetalCloak precisely cuts the top metal plate and aligns its' top surface in "tangent" with the tube. This creates a flush top surface, sure it's more work but the result is a smoother finished look.
Dividing Line
COVERAGE BY DESIGN:

Hardline on JK

MetalCloak Hardline Fenders provide the most coverage behind the tire that we offer, this helps with road spray and mud splatter.
Each fender is precision fitted and hand welded to ensure a perfect fit.

Dividing Line
STRENGTH BY DESIGN:
MetalCloak is more than just looks; It is about functionality. We build nothing unless it serves a functional purpose. In this case our fenders provide clearance, superior fit, AND the signature strength we are known for.

The JK is notorious for having weak sheet metal paneling.

To overcome this, we created a unique bracketing system that adds exponential strength to the factory mounts. These brackets allows for a simplified installation that add the foundation that support the MetalCloak Hardline Fenders.

Tube Fender
Dividing Line

MOST TIRE CLEARANCE:

MetalCloak's JK Hardlines provide the most clearance behind the tire and 3 inches of additional clearance over the tire compared to stock!

  • 3" of Additional Clearance vs. Stock JK Fenders

JK Tube Fenders

JK Tube Fenders
Dividing Line

PRECISION FIT:

MetalCloak Hardline fenders closely follow the factory body lines with a large radius bend on the top section. This radius bend provides the best fitment of any aftermarket tube fender!

While "some" manufacturers cut corners and pass on a poor fitting product to the end user, MetalCloak adds value by applying additional processes to ensure the best fitting Tube Fender and Flares available. See the differeence!

JK Tube Fenders

JK Tube Fenders
Dividing Line
INTEGRATED LED MARKER LIGHTS
MetalCloak's Hardline Fenders are about clean lines and great fitment; it continues down to the last details.

Integrated attachment points for Low Profile LED Marker Lights are seamlessly tucked under, and out of harm's way to complement the finished look.

Tube Fender
Dividing Line

TESTIMONIALS & BUZZ:


Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
OPTIONS:
Raw Metal Premium Black Textured Powdercoat
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two to three weeks. Check out our video on how we powdercoat.
Tube Fender Preparation
Dividing Line
SHIPPING & MATERIAL SPECIFICATIONS
ItemsMaterials
Driver & Passenger Fenders 12GA Cold Steel Plate
1 1/2" .120 Steel Tubing
Driver & Passenger Bracket 1/8" Aluminum Plate
Total Weight 85 lbs
Available in Raw? Yes
Available in Black Powdercoat? Yes
Dividing Line
INSTALLATION
Installation Difficulty Easy - Bolt On
Body Modification None
Time to Install 4 - 6 Hours
Dividing Line
Icon

INSTALLATION INSTRUCTIONS:

At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
Dividing Line
Rating:
100% of 100
Write Your Own Review
You're reviewing:Hardline Tube Fenders, JK Wrangler, Front
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.