MetalCloak's Jeep JK Wrangler Full Replacement Suspension Hardware Kit for is an 82 piece kit that features replacement hardware for all Control Arms, Front/Rear Track Bars and Lower Shock Mounts.

Features Include:

• Works For JK Wranglers
• Control Arm Hardware
• Grade 8 Bolts (14)
• Washers (22)
• Nuts (8)
• Flag Nuts (6)
• Track Bar Hardware
• Grade 8 Bolts (4)
• Washers (8)
• Nuts (4)
• Shock Mount Hardware
• Grade 8 Bolts (4)
• Washers (8)
• Nuts (4)
• Gold Zinc Hardware

Full Replacement Suspension Hardware Kit from MetalCloak is what you need to replace your [click for more...] worn out fasteners. MetalCloak's Patented Duroflex Control Arms do not put the stresses on stock hardware like typical suspension kits do, so it is possible to re-use all your stock hardware. If your JK has old, worn out, or mother nature has played havoc with your stock hardware, this kit is your ultimate solution.

Note: This item is considered a builder part, as such there are no instructions for the use of these products; if using any of the builder parts you should be confident of your mechanical skill level and know that you will use at your own risk.

Note: MetalCloak recommends you have a suspension specialist align your truck once MetalCloak suspension is installed.

[click for less...]