JK Wrangler 6Pak Shock Upgrade System
**Longer Travel & Easy Install**
Ready to get the most out of your MetalCloak Game Changer suspension? Upgrade from the standard shocks and get the performance of the longest travel shock available anywhere with bolt-on simplicity!
Features Include:- Front & Rear 6Pak Shocks
- Compressed Size Eye to Eye: 13 1/4"
- Extended Length Eye to Eye: 28 1/4"
- Dual Opposing Nitrogen Charged Reservoirs
- Fully Rebuildable (Call about MetalCloak's Rebuild Program)
- Improve Wheel Travel and Ride Quality
- Driver & Passenger 3/16" Steel Upper Shock Mount Brackets
- Lower Shock Mount Spacers
- Brake Line Bracket Relocation Bolts
- Driver & Passenger 3/16" Steel Lower Shock Mount Brackets
- Lower Shock Mount Spacers
- Upper Rear Bar Pin Eliminators
- Gold Zinc Plated Protection
- Additional Shock Body Clearance
- Additional Ground Clearance
- All Necessary Hardware for Installation
- Made in the USA
The front shock mount kit provides the additional clearance needed to position up to 15" travel 6Pak shocks into your Jeep with ease. Simply bolt in the strong 3/16" hot rolled steel plate brackets into the factory location and install the shocks.
The rear mounting kit allows the use of 6Pak shocks and eliminates the typical shock mounts that can limit travel. When used this provides clearance for the shock bodies and also allows trimming of the factory mounts providing up to an additional 3in of ground clearance.
Note: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturers warranty.
Note: MetalCloak recommends you have a suspension specialist align your Jeep once MetalCloak suspension is installed.
[click for less...]
VIDEOS
MetalCloak's Jeep JK Wrangler Suspension.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
MetalCloak 6Pak
The shock is no longer the limiting factor in your build.
How to make a MetalCloak Shock
Each 6Pak shock is hand built to exacting standards and then Dyno tested here at MetalCloak in Sacramento California.
What is Corner Travel Index?
Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the county collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
THE TECH
6Pak Shocks
Specifically designed for applications where space is paramount and travel will be maximized. The 6Pak compact shock body extends shafts from both sides of a floating remote reservoir/body providing more extended length than ANY other shock that bolts into factory locations; the long travel capability is contained in the smallest compressed package providing maximum up travel also.
MetalCloak's Floating Shock Body Technology (FST) provides a game-changing platform featuring parallel shafts extending from the 6 tube floating body. The shock is centralized with dual opposed, nitrogen charged reservoirs that give additional cooling capacity along with up to 15 inches of travel.
The compact, compressed body of the 6Pak is small allowing the lower shock attaching points to be trimmed and moved up for additional "under clearance" without sacrificing travel.
Front 6Pak Shock Shown
The shock is no longer the limiting factor in your build.
6Pak Bushing
Now Easier to Install!
Our new fixed bushing is precisely positioned to ensure easy install.
Just put the shock in position and bolt it in.
Prepositioned rubber bushing eyes keep it in place while providing even more NVH protection.
6Pak Front Shock Mounting Kit
Shock Mount Brackets:
- Bolt-On (No Welding Required)
- CNC Formed, 3/16" Hot Rolled Steel Plate
- Bolts Directly into Factory Shock Locations
- Designed Specifically for the 6Pak Shocks
- Gold Zinc Plating
6Pak Rear Shock Mount Kit
Shock Mount Brackets:
- Gain 3" of Ground Clearance
- Easy Installation, Just Bolts On
- CNC Formed, Laser Cut 3/16" Hot Rolled Steel Plate
- Gold Zinc Plating
- Outboard Offset for 6Pak Body Clearance
Bar Pin Eliminators:
- Specially Designed for 6Pak Shocks
- Inboard Offset for 6Pak Body Clearance
- Allows 6Pak to Bolt into Stock Location
- Gains 1/2" of Additional Down Travel
Longer Shocks & More Clearance!
Up to 3" of the stock JK shock mount is eliminated with the 6Pak Shock Mount System. That's 3" added to your departure angle.
What's In The Kit?
- Front 6Pak Shocks
- Rear 6Pak Shocks
- Upper Front Shock Brackets
- Brake Line Bracket Relocation Bolt
- Rear Shock Mount Brackets
- Bar Pin Eliminators
- Drop Spacers (depends on your option)
- All Required Hardware
TECHNICAL SPECIFICATIONS
Items | Details |
---|---|
Compatibility | 2007 - 2018 JK Wrangler |
Front Shock Mount Brackets | 3/16" Hot Rolled Steel Plate |
Rear Shock Mount Brackets | 3/16" Hot Rolled Steel Plate |
Bar Pin Eliminators | 3/4" A36 Steel |
Steel Coating | Gold Zinc |
IMPORTANT NOTES
Warranty: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturers warranty."
Alignment: MetalCloak recommends you have a suspension specialist align your Jeep once suspension is installed.
INSTALLATION
Installation Difficulty | Easy |
Body Modification | None |
Time to Install | 1 Hour |
Installation Instructions | Click Here to see a full list of MetalCloak Installation Instructions. |