It's Your Jeep, Only Better

JK Wrangler Rear Coil Spring Spacer

Our MetalCloak JK Rear Coil Spring Spacer is a fine tuning option that we offer our most discerning Jeepers.

This will help you fine tune the corner height of your JK Wrangler, specific for your Jeep build.

Why do you need it?

Many times when adding accessories it can affect the way your jeep sits as you add weight to one side or the other. Our simple and effective spacers are the most affordable way to adjust the corner height of your rig.
If you find your Jeep not sitting exactly level and just have to make it perfect, this is the answer for you.

Rear Coil SpringSpacer Kit Includes:

  • (4) Rear Laser Cut Gold Zinc Plated Steel Spacer Rings
  • (2) Rear Gold Zinc Coil Retainers
100% of 100
Availability: Usually Ships in 1 Week
Product Code: 7192
Dividing Line
JK Spring Spacers MetalCloak Coil Spring Spacers...
  • Allows for precise corner height adjustments
  • 1/8" Thick Steel
  • Gold Zinc Plated Finish
These are perfect for fine tuning the corner height on your Jeep.

As you build your Jeep and add accessories it can cause it to have a slight lean as the weight may not be balanced perfectly on the chassis; although this is only a cosmetic issue you can remedy it easily with the combination of spacers and retainers.
Dividing Line
  • Easy Installation
  • Ensures Coil Spring Can Not Fall Out
  • 1/4 Thick Steel
  • Gold Zinc Plated Finish
Added safety...

Don't take a chance on your coil spring falling out at extremes of articulation or rattling in the bucket. Get MetalCloaks Coil Spring Retainers for absolute assurance your springs stay in place.
JK Sectional Bump-Stops
Dividing Line

Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Coil Spring Spacer 11GA Hot Rolled Steel
Coil Spring Retainer 1/4" Hot Rolled Steel
Total Weight 2 lbs
Available in Gold Zinc? Yes

OEM Clevite and Typical Flex Joint is the Duroflex Joint
Installation Difficulty Easy - Bolt On
Body Modification None
Time to Install 1 Hour
OEM Clevite and Typical Flex Joint is the Duroflex Joint


At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
OEM Clevite and Typical Flex Joint is the Duroflex Joint
100% of 100
Write Your Own Review
You're reviewing:JK Wrangler Rear Coil Spring Spacer
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.