It's Your Jeep, Only Better

JK Wrangler ('12 - Current) sPod Mount & Vacuum Pump Relocation Kit

The JK "sPod" MOUNT & VACUUM PUMP RELOCATION KIT for the 2012 and later model Wranglers, moves the Vacuum Pump (located by your front frame rail) up into the engine compartment and provides a mount for the popular sPod Wiring System.

Relocating the vacuum pump is a necessary project to allow fitment of the MetalCloak JK Frame-Built Bumper System or any other bumper that allows your winch to sit low between the frame rails.

With the ever-growing popularity of the sPod, our original Vacuum Pump Relocation Bracket could interfere with the sPod mount, so we solved the problem by combining the two!

$69.00
Rating:
95% of 100
Availability: Usually Ships in 1 Week
Product Code: 3151
Dividing Line

JK SPOD VACUUM PUMP RELOCATION KIT

The 2012 and later model JK's have a vacuum canister located off the inside of the front frame rails.

This canister is located right where most bumpers put the winch on a JK.

This simple and effective relocation bracket moves the canister up to the engine compartment providing the needed space and then adds extra value by creating the perfect spot to mount an "SPOD" source unit in your JK.

Note: Moving the canister here does not compromise any of your Jeep's systems.

JK Spod Vacuum Pump Kit
Dividing Line

TESTIMONIALS & BUZZ:


Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
SHIPPING & MATERIAL SPECIFICATIONS
ItemsMaterials
Vacuum Relocation 11GA Cold Steel Plate
18GA Two-Conductor Wire
Total Weight 2 lbs
Available in Raw? No
Available in Black Powdercoat? No
Available in Gold Zinc? Yes
OEM Clevite and Typical Flex Joint is the Duroflex Joint
INSTALLATION
Installation Difficulty Easy
Body Modification None
Time to Install 1 Hour
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Icon

INSTALLATION INSTRUCTIONS:

At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Rating:
95% of 100
Write Your Own Review
You're reviewing:JK Wrangler ('12 - Current) sPod Mount & Vacuum Pump Relocation Kit
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.