TJ/LJ Front Lower Long-Arm Control Arms
Equipped with the Patented MetalCloak Duroflex™ (metalcloakpatents.com) self-centering composite bushings at both ends for a combined misalignment of over 68 degrees.
Now made with DuPont™ Kevlar® fiber - the first suspension components manufactured with Kevlar® for industry leading durability.
All parts are treated with Gold Zinc Chromate for the ultimate in defense against the elements.
Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once MetalCloak Suspension is Installed.
MetalCloak's Jeep TJ Wrangler Game-Changer Suspension is the proven leader among production suspension systems.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
This short video covers what you need to know about the basics of the Duroflex Joint. How it should be used and what to expect when using it.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc
Duroflex Joint Maintenance
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Joint Maintenance
Duroflex Joint Revealed
The MetalCloak Duroflex Joint takes the best qualities of OEM style Clevite Joint and the popular Johnny Joint style Flex Joint and combines them.
We tested our Duroflex Joint using a "Shaker Table" and seismometer app to show how much Vibration Dampening the Duroflex Joint gives you compared to other industry leading joints.
A Comparison of Flex
Comparing the Flex of the Duroflex Joint with that of the Johnny Joint, the Teraflex Monster and the typical Clevite.
"Typical" Radius Arm systems inherently bind causing premature bushing wear and excessive stress on bracketry. The Lock-N-Load solves that problem.
FMVSS 126 Compliant
MetalCloak not only has the best off road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
Lower Front Long Arms
Both the Front Radius Arms and the Lower Rear Hi-Clearance Arms are manufactured for the ultimate in strength and versality.
- 2" .18 wall DOM
- Signature Gold Zinc Chromate
- Oversized Duroflex Joints at the Belly Pan
Control Arm Duroflex Joint Alignment...
Yes, the Radius Arm is back!
- Fit ideally in to the limited space under the TJ/LJ Wrangler.
- Aid to the protection of vital components of the under carriage.
- Allow maximum up and down wheel travel while keeping the pinion angle in check.
- Have unparalleled on-road handling characteristics that cannot be denied.
MetalCloak's Lock-N-Load Radius Arm system removes the most common problem that causes more long term damage to bushings and axles... BIND.
The Lock-N-Load extends at full droop, compressing one spring and extending the other.
At full stuff, the Lock-N-Load compresses. There is always compression and resistence.
IT ALL STARTS WITH THE BUSHINGS
The Patented Duroflex™ Joint (metalcloakpatents.com) is the key to getting the greatest flex in a bolt-on suspension kit. Period.
MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34˚), Self-Centering, Rebuildable Joint with an OEM quality ride.
Now with Kevlar!
DuPont™ Kevlar® Fiber is now compounded in the proprietary elastomer of the Duroflex Bushing, bringing even more strength, durability and performance.
Kevlar® is a synthetic fiber with extremely high tensile strength to weight ratio…five times stronger than steel and commonly used in bullet proof armor applications.
Duroflex Bushings w/Kevlar® can be identified by the Metalcloak “M” located on the outer surface.
The Duroflex Joint Provides The Best Ride. Period.
Made of a Proprietary Elastomer Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...
- The best ride quality
- No binding of your control arms.
- None of the micro-wear that DESTROYS Flex Joints
By adapting the High Transverse Flex characteristics of a typical Flex Joint, the Duroflex Joint gives you...
- Over 34° of Misalignment
- Over 68° per Control Arm
Because the Duroflex Bushing absorbs the millions of Rotational Micro-Movements found in your daily driving, you get...
- Improved Ride Quality
- None of the micro-wear that DESTROYS Flex Joints
True Bearing Surface...
The outer surface of the Duroflex Bushing acts as a bearing, breaking free when called for, giving you...
- Maximum Rotation & Articulation
- No "Binding Up" of the Control Arms
Low Maintenance & Rebuildable...
Unlike typical Flex Joints, the Duroflex does not require replacing key parts every year like others...
But, when you do need to rebuild it, it is MetalCloak Easy!
Just pull out the Duroflex Bushing, clean it up, add some new Teflon impregnated, synthetic silicone grease. Reassemble.
Forged for Strength...
The adjustable threaded sides are Forged that give a 37% higher fatigue strength over inferior cast parts, this EXTRA rock bashing strength will hold up to whatever you throw at em.
Control Arm Specs
- CNC Machined
- 3/16" Wall DOM Steel
- 2.0" OD
- Precision Locking Nut
- Gold Zinc Plated
- Duroflex Joint at Both Ends
Degrees of Articulation
MetalCloak's Duroflex Joint provides 28˚ more articulation and flex than typical control arms! (Learn More About Duroflex Control Arms)
What's in the Kit?
- Front Lower Long Arms
- All Required Hardware
|Compatibility||1997 - 2006 Jeep TJ Wrangler|
|Long Arm Control Arms||2.0" .18" DOM Steel Tubing|
|Lock-N-Load||2 1/2" .120" Steel Tubing|
|Duroflex Joint||Proprietary Vulcanized Elastomer made with DuPont™ Kevlar® fiber|
|Steel Coating||Gold Zinc|
Suspension Alignment: We Recommend You Have a Suspension Specialist Align Your Jeep Once a MetalCloak Suspension is Installed.
|Time to Install||1 - 2 Hours|
|Installation Instructions||Click Here to see a full list of MetalCloak Installation Instructions.|