"Big Bolt" Jeep TJ/LJ/XJ Upper Front Double Adjustable Aluminum Control Arms

The MetalCloak "Big Bolt" TJ/LJ/XJ Upper Front Double Adjustable Aluminum Control Arms provide a rugged option with a larger diameter hole at in the joints to allow for a bigger 1/2" bolt, while maintaining precision adjustability.

Manufactured out of solid 1½" Extruded Aircraft Grade Aluminum Hex Bar, the control arms are not only just prepared to take on any off-road abuse thrown at em'; they also provide more material between the OD and the ID vs. other aluminum control arms on the market. The Aluminum Hex Bar configuration makes them incredibly easy to adjust too. All new mounting hardware is included.

Now made with DuPont™ Kevlar® fiber - the first suspension components manufactured with Kevlar® for industry leading durability.

Equipped with the Patented MetalCloak Duroflex™ (metalcloakpatents.com) self-centering composite bushings at both ends for a combined misalignment of over 68 degrees.

Note: Factory bracket must be drilled out to fit larger diameter bolt.

Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once Suspension is Installed.

$269.00

Rating:

100% of 100

1 Review Add Your Review

Availability: Usually Ships in 1 Week

Product Code: 7076

Features

DUROFLEX 101-EVERYTHING YOU NEED TO KNOW ABOUT THE DUROFLEX JOINT

This short video covers everything you need to know about the basics of the MetalCloak Duroflex Joint.

Check Out the Video>>>

DOUBLE ADJUSTABLE ALUMINUM UPPER FRONT CONTROL ARMS

The Double Adjustable Control Arm for the TJ/LJ Upper Front are aluminum short arms designed to accept Duroflex Joints at each end.

Right Hand and Left Hand Duroflex Joints
Aircraft Grade Aluminum Hex Stock
Easy to Adjust
Added Material for Additional Strength
Standard Length - 15.125"
Minimum Length - 14.5"
Maximum Length - 16.125"

Q: WHAT IF A CLEVITE JOINT MET A FLEX JOINT IN A BAR...

A: You'd have the key to the MetalCloak Control Arms, the Patented Duroflex Joint ( metalcloakpatents.com)

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34°), Self-Centering, Rebuildable Joint with an OEM quality ride.
OEM Style Clevite Joint	Typical Flex Joint	MetalCloak Duroflex Joint
High Vibration Dampening Self-Centering Fused at Center Bushing (No Bearing Surface Wear)	High Transverse Flex High Rotational Flex Rebuildable	High Vibration Dampening Self-Centering Fused Center Bushing (No Bearing Surface Wear) High Transverse Flex High Rotational Flex Rebuildable

DEGREES OF ARTICULATION...

MetalCloak's Duroflex Joint provides 28° more articulation and flex than typical control arms!

The MetalCloak Kevlar® bushings can be identified by the M located on the surface.

DuPont™ Kevlar® continues to take on new challenges, their scientists are continuously innovating and working on a range of new opportunities through collaborations with communities, industrial manufacturers, and governments. Together we’re bringing the strength, durability and performance of Kevlar® to new frontiers. Kevlar® aramid fiber is pushing boundaries and defying obstacles every day.

CONTROL ARM SPECIFICATIONS:

Note: These Control Arm Specifications are Just Starting Points. ALL JEEPS ARE DIFFERENT. MetalCloak Recommends Seeing a Suspension Specialist for Correct Control Arm Lengths For YOUR Jeep.

LARGE BOLT FOR ADDED STRENGTH

TJ Wrangler Upper Front

1.5" Hex Aircraft Grade Aluminum
Precision Locking Nut
Gold Zinc Plate
Duroflex Joint at Both Ends

TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.

Specifications & Materials

SHIPPING & MATERIAL SPECIFICATIONS

Items	Materials
Control Arms	1 1/2" Aluminum Hex Bar
Durotrack Bushing	Proprietary Vulcanized Rubber made with DuPont™ Kevlar® fiber
Total Weight	15 lbs
Available in Raw?	Yes - Hex Bar
Available in Powdercoat?	No
Available in Zinc?	Yes

Installation Instructions

INSTALLATION

Installation Difficulty	Easy-Bolt on
Body Modification	None
Time to Install	1 - 2 Hours

INSTALLATION INSTRUCTIONS:

At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.