The MetalCloak TJ/LJ/XJ Lower (Front or Rear) Double Adjustable Aluminum Control Arms provide a rugged option for TJ/LJ/XJ owners who are looking for more precision in their suspension system.
Now made with DuPont™ Kevlar® fiber - the first suspension components manufactured with Kevlar® for industry leading durability.
Manufactured out of solid 1½" Extruded Aircraft Grade Aluminum Hex Bar, the control arms are not only prepared to take any off-road abuse, providing more material between the OD and the ID vs. other aluminum control arms on the market, but the Hex Bar configuration makes them incredibly easy to adjust.
Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once MetalCloak Suspension is Installed.
|
||||||||||
DUROFLEX 101-EVERYTHING YOU NEED TO KNOW ABOUT THE DUROFLEX JOINT |
||||||||||
This short video covers everything you need to know about the basics of the MetalCloak Duroflex Joint.
Check Out the Video>>> |
|
|||||||||
|
||||||||||
DOUBLE ADJUSTABLE ALUMINUM LOWER CONTROL ARMS |
||||||||||
The Double Adjustable Control Arm for the TJ/LJ Lower (Front or Rear) are aluminum short arms designed to accept Duroflex Joints at each end.
|
![]() |
|||||||||
![]() |
||||||||||
Q: WHAT IF A CLEVITE JOINT MET A FLEX JOINT IN A BAR... A: You'd have the key to the MetalCloak Control Arms, the Patent Pending Duroflex Joint ( metalcloakpatents.com) |
||||||||||
![]() |
||||||||||
|
||||||||||
![]() |
||||||||||
THE DUROFLEX JOINT PROVIDES THE BEST RIDE. PERIOD. | ||||||||||
![]() |
The MetalCloak Kevlar® bushings can be identified by the M located on the surface.
DuPont™ Kevlar® continues to take on new challenges, their scientists are continuously innovating and working on a range of new opportunities through collaborations with communities, industrial manufacturers, and governments. Together we’re bringing the strength, durability and performance of Kevlar® to new frontiers. Kevlar® aramid fiber is pushing boundaries and defying obstacles every day. |
|||||||||
High Vibration Dampening & Self Centering... Made of a Proprietary Rubber Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...
|
![]() |
|||||||||
![]() |
High Misalignment... By adapting the High Transverse Flex characteristics of a typical Flex Joint, the Duroflex Joint gives you...
|
|||||||||
Absorbs Micro-Movements... Because the Duroflex Bushing absorbs the millions of Rotational Micro-Movements found in your daily driving, you get...
|
![]() |
|||||||||
![]() |
True Bearing Surface... The outer surface of the Duroflex Bushing acts as a bearing, breaking free when called for, giving you...
|
|||||||||
Low Maintenance & Rebuildable... Unlike typical Flex Joints, the Duroflex does not require replacing key parts every year like others... But, when you do need to rebuild it, it is MetalCloak Easy! Just pull out the Duroflex Bushing, clean it up, add some new Teflon impregnated, synthetic silicone grease. Reassemble. Done. |
![]() |
|||||||||
![]() |
||||||||||
DEGREES OF ARTICULATION...
MetalCloak's Duroflex Joint provides 28° more articulation and flex than typical control arms! |
||||||||||
![]() |
![]() |
|||||||||
![]() |
||||||||||
CONTROL ARM SPECIFICATIONS:
Note: These Control Arm Specifications are Just Starting Points. ALL JEEPS ARE DIFFERENT. MetalCloak Recommends Seeing a Suspension Specialist for Correct Control Arm Lengths For YOURJeep. |
||||||||||
|
||||||||||
![]() |
||||||||||
TESTIMONIALS & BUZZ: Check out what Jeepers everywhere are saying about our products on The Buzz Page. |
||||||||||
![]() |
SHIPPING & MATERIAL SPECIFICATIONS | ||||||||||||||
|
||||||||||||||
![]() |
INSTALLATION | ||||||
|
||||||
![]() |
![]() |
INSTALLATION INSTRUCTIONS: At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions. |
![]() |