It's Your Jeep, Only Better

JK Wrangler True Dual-Rate Lift Kit, 2.5"/3.5"

The MetalCloak JK Wrangler 3.5" Dual-Rate Lift Kit is the perfect kit for the discerning JK owner looking for a little lift but not planning on extreme off-road conditions.

Designed to use Stock Shocks (or you can choose to add any aftermarket shock).

MetalCloak's True Dual Rate™ Coils are the focus of the kit, providing a more stable ride and better overall ride quality then typical single rate or progressive coils. Front Upper Control arms are included in the kit to allow for setting the proper caster angle.

This is an entry-level kit -- a 3.5" lift kit, that gives you lift, unprecedented ride quality, and at an affordable price that allows you to build upon the kit if your ultimate goal is the Game Changer.

Now made with DuPont™ Kevlar® fiber - the first suspension components manufactured with Kevlar® for industry leading durability.

Note: All 2012+ JK Wrangler will require exhaust spacers (7078) for clearance for the front drive shaft.

Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once MetalCloak Suspension is Installed.

Note: MetalCloak does not recommend powder coating your True Dual Rate Coils. See instructions for additional details.

Availability: Usually Ships in 1 Week
Product Code: 7115*
JK Wrangler True Dual-Rate Lift Kit, 2.5"/3.5"  

$1,199.00

Dividing Line
TRUE DUAL RATE. A LIFT KIT WITH PERSONALITY.

The JK Wrangler True Dual-Rate 3.5" Lift Kit, is as good as you can get in any lift kit. And the best part? You can build your MetalCloak Suspension on top of it piece by piece.

This is one of our most basic option. Still awesome with our True Dual Rate™ Coils, but without all the frills.

This kit was designed to provide 3.5" of lift while mostly using your stock control arms. It gives you a high quality ride with the extreme stability and ride comfort of our True Dual Rate™ Coils.

Additionally, we go the extra step by including the upper front Control Arms for easy Caster alignment.

Dividing Line

WHAT'S IN THE KIT?

  • True Dual Rate™ Coils give you stability and comfort that far exceeds single rate or progressive coils.
  • Extended brake lines are longer than typical lines on a 3.5" kit.
  • Re-Use your stock shocks with our shock extenders or add your own new shocks.
  • Adjustable bump stops ensure you'll have the correct bump every time.
  • Fully adjustable Solid Chromoly front Durotrak track bar increases ride stabibility.
  • Rear track bar clearance kit allows you to use your stock rear track bar.
  • Adjustable front upper control arms help set proper Caster angle.

Click the image on the right to see all the components.

7115 Small Thumbnail
Dividing Line
CONTROL ARM SPECIFICATIONS...

Front Control Arms Rear Control Arms
Castor Angle Lower Upper Lower Upper
Factory Control Arms Stock 22 5/8" 18 3/4" 19 3/4" 17 7/16"
MetalCloak 2.5 - 3.5" Lift 5 Degrees 22 5/8" 18 3/8" 19 3/4" 17 7/16"

Note: These Control Arm Specifications are Just Starting Points. ALL JEEPS ARE DIFFERENT. MetalCloak Recommends Seeing a Suspension Specialist for Correct Control Arm Lengths For YOUR Jeep.

7002 Specifications

JK Wrangler Upper Front
(SKU #7002)

  • CNC Machined
  • 3/16" Wall DOM Steel
  • 1.25" OD
  • 3/16" Steel Clevis
  • Precision Locking Nut
  • Gold Zinc Plated
  • Duroflex Joint
Learn More About the Upper Front Control Arms >>>
Dividing Line
DUROFLEX JOINTS

The Patent Pending Duroflex™ Joint ( metalcloakpatents.com). is the key to getting the greatest flex in a
JK Wrangler bolt-on suspension kit. Period.

OEM Clevite and Typical Flex Joint is the Duroflex Joint

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34˚), Self-Centering, Rebuildable Joint with an OEM quality ride.


OEM Style Clevite Joint Typical Flex Joint MetalCloak Duroflex Joint
  • High Vibration Dampening
  • Self-Centering
  • Fused at Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
  • High Vibration Dampening
  • Self-Centering
  • Fused Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
Duroflex Kevlar Bushing The MetalCloak Kevlar® bushings can be identified by the M located on the surface.

DuPont™ Kevlar® continues to take on new challenges, their scientists are continuously innovating and working on a range of new opportunities through collaborations with communities, industrial manufacturers, and governments. Together we’re bringing the strength, durability and performance of Kevlar® to new frontiers. Kevlar® aramid fiber is pushing boundaries and defying obstacles every day.
Dividing Line
DEGREES OF ARTICULATION...

MetalCloak's Duroflex Joint provides 28˚ more articulation and flex than typical control arms!

Duroflex Control Arms Articulation Low ARticulation Joints.
Dividing Line

COIL SPRINGS 101-EVERYTHING YOU NEED TO KNOW ABOUT COIL SPRINGS

This short video covers what you need to know about the basics of Single Linear Rate Coil Springs and MetalCloak's True Dual Rate Coils. How Linear Coil Springs and MetalCloak's True Dual Rate Coils work and what to expect when using them.

Check Out the Video>>>

Dividing Line
WHAT ARE TRUE DUAL RATE ™ COILS?

MetalCloak JK Wrangler True Dual Rate™ Coils have one of the longest free length in the industry for greater articulation without sacrificing the OEM ride quality.

Without the advantage of the Dual Rate Design, the required Spring Rate would be too low and "squishy" -- just loading your Jeep up with supplies would affect ride height and quality.

Understanding Dual Rate Coils
JK Wrangler 3.5" True Dual Rate™ Coils, Front JK Wrangler 3.5" True Dual Rate™ Coils, Rear
SS-2034 SS-2035

Learn More about the True Dual Rate™ Coils Specifications >>>

Dividing Line
STOP THE GUESS WORK. BUMP IT UP!

Our Adjustable Bump-Stop removes the guess work on your Jeep and lets you build the
bump stop you need, when you need it.

Metalcloak Adjustable Bump Stop System...

  • Adjust from 1" - 4" Without Removing Coils
  • Perfect Height Regardless of Tire Size
  • Thermoset Rubber Dampens Impact
  • Additional Pads Available on Request

Get Correct Bump-Stop Height Every Time!

  • 4" - Use all 4 sections and longest hardware bolts for maximum bump-stop height
  • 3" - Use all 3 sections and long hardware bolts for maximum bump-stop height
  • 2" - Two sections and medium hardware bolts are used for medium bump-stop height
  • 1" - One section and the short hardware bolts are used for the minimum bump-stop height

JK Sectional Bump-Stops

Learn More about the Adjustable Bump Stops >>>

Dividing Line
BUMP STOP SIZING RECOMMENDATIONS:
2007+ Jeep Wrangler JK with Recommended Old Man Emu Long Travel Shocks
Tire Size
31" 33" 35" 37" 40"
MetalCloak High Clearance
Overline Fenders
2" 2" 2" 3" 4"
MetalCloak Overland Fenders 2" 2" 3" 4" NR
Stock Fenders (not trimmed) 2" 3" 4" NR NR
Generic Aftermarket Fenders
(Poison Spyder, Xenon, Bushwacker)
2" 2" 3" 4" NR

NR = Not Recommended

Dividing Line
REAR ADJUSTABLE BUMP STOPS

Manufactured from trail-proven natural thermoset rubber, each puck is designed to work universally with your JK Wrangler.

Designed specifically for the JK Wrangler,
the system comes with 4 Rectangular Pucks,
allowing for easy adjustment between 1" - 4"

7043 Exploded View
Learn More about the Rear Adjustable Bump Stops >>>
Dividing Line

JK Wrangler Rear Shock Mount & Clearance Kit

  • Gain 3" of Ground Clearance
  • Easy Installation, Just Bolts On
  • CNC Formed, Laser Cut 3/16 Steel
  • Gold Zinc Plating
  • Outboard Offset for 6Pak Body Clearance

Rear Shock Relocation Brackets

You Can Re-Use Your Stock Shocks or Other Aftermarket Shocks with the Shock Relocation Bracket

Note: If You Plan to Use the Old Man Emu Long Travel Shocks, You Must Use the Stock Shock Mount
Stock Clearance Jeep
Dividing Line

NOT JUST ANY TRACK BAR BUSHING... MEET THE DUROTRAK™

This short video covers what you need to know about the Durotrak Bushing. The Patent Pending Durotrak™ Bushing ( metalcloakpatents.com) is a bushing made with a proprietary rubber compound unique to MetalCloak. The Durotrak™ bushing is comprised of two pieces that thread together allowing this bushing easy to install without a press. Eliminate squeaks and clunks in your steering with the technology of MetalCloak’s Durotrak™ bushings; exclusively found in MetalCloak track bars.

Check Out the Video>>>

Durotrak Bushing

The Patnet Pending Durotrak Bushing (metalcloakpatents.com) is a NVH (noise, vibration, harshness) bushing made with a proprietary rubber compound unique to MetalCloak. The Durotrak two part bushing is comprised of two pieces that thread together making this bushing simple to install without a press, reduces vibration and harshness transferred to the driver, and improves vehicle steering input.

Dividing Line
SOLID CHROMOLY FRONT DUROTRAK TRACK BAR KEEPS YOU... WELL... ON TRACK.
Formed for ultimate Up-Travel & Down-Travel the JK Wrangler Front Track Bar gives unprecedented strength, clearance, and improved ride stability.
JK Front Track Bar

Learn More about the JK Wrangler Front Track Bar >>>

Dividing Line
BOLT ON BRACKET IS A KEY COMPONENT
The bolt-on relocation and clearance bracket provides an easy to install solution that corrects the geometry for lifted heights and cuts cost by re-using the factory track bar on your Jeep JK Wrangler.
JK Wrangler Track Bar Relocation Bracket
Learn More about the JK Wrangler Rear Track Bar Bracket >>>
Dividing Line
JK WRANGLER REPLACEMENT BRAKE LINE, 24.5"

From the Teflon Inner Core, to the Stainless Steel Braid and Poly Safety Coat, the MetalCloak replacement Brake Lines are the best available on the market today.

Longer than typical brake lines of similar lift heights because of our additional clearance and travel.

JK Wrangler Hi Clearance Front Track Bar
Dividing Line
TESTIMONIALS & BUZZ:

Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
SHIPPING & MATERIAL SPECIFICATIONS
ItemsMaterials
Track Bar 4130 Solid Chromoly
Durotrack Bushing Proprietary Vulcanized Rubber
Coils High Tensile Chrome Steel
Control Arms 1 1/2" .187 DOM Steel Tubing
Duroflex Joint Proprietary Vulcanized Rubber made with DuPont™ Kevlar® fiber
Track Bar Bracket 7GA Hot Rolled Steel
Brakelines Braided Stainless Hose
Front Bump Stops Thermoset Rubber
Rear Bump Stops Thermoset Rubber
Total Weight 120 lbs
Available in Gold Zinc? Yes
Dividing Line
INSTALLATION
Installation Difficulty Easy
Body Modification None
Time to Install 6 - 8 Hours
Dividing Line
Icon

INSTALLATION INSTRUCTIONS:

At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
Dividing Line
Write Your Own Review
You're reviewing:JK Wrangler True Dual-Rate Lift Kit, 2.5"/3.5"
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.