It's Your Jeep, Only Better
JK Radius Long Arms, Lower Front
These Long Arms attach via MetalCloaks bracket system and work in conjunction with the Lock-N-Load upper control arm to relieve binding forces.
Equipped with the proven MetalCloak Patented Duroflex™ (metalcloakpatents.com). self-centering composite bushings at both ends for a combined misalignment of over 68 degrees. [more...]
Now made with DuPont™ Kevlar® fiber - the first suspension components manufactured with Kevlar® for industry leading durability.
All parts are treated with Gold Zinc Chromate for the ultimate in defense against the elements.
Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once MetalCloak Suspension is Installed.[less...]
MetalCloak's Jeep JK Wrangler Suspension.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Duroflex 101
This short video covers everything you need to know about the basics of the MetalCloak Duroflex Joint.
THE TECH
|
EXCLUSIVE TO THE LOCK-N-LOAD LONG ARM SYSTEM |
||||||||||
|
|
Yes, the Radius Arm is back and better than ever! Radius Front Control Arms:
|
|||||||||
|
But Radius Arms of the past typically have a major problem... BIND. This bind causes premature bushing wear and undue stresses on the axle. MetalCloak Radius Control arms are engineered to work exclusively with the "bind relieving" Lock-N-Load" upper control arm to provide all the benefits without the drawbacks. Great clearance for up and down travel under the JK Wrangler. Aids to the protect the vital components of the under carriage. Allows maximum up and down wheel travel while keeping the pinion angle in check. |
||||||||||
 |
||||||||||
|
Q: WHAT IF A CLEVITE JOINT MET A FLEX JOINT IN A BAR... A: You'd have the key to the MetalCloak Control Arms, the Patented Duroflex Joint ( metalcloakpatents.com). |
||||||||||
 |
||||||||||
|
||||||||||
|
||||||||||
| THE DUROFLEX JOINT PROVIDES THE BEST RIDE. PERIOD. | ||||||||||
 |
The MetalCloak Kevlar® bushings can be identified by the M located on the surface. DuPont™ Kevlar® continues to take on new challenges, their scientists are continuously innovating and working on a range of new opportunities through collaborations with communities, industrial manufacturers, and governments. Together we’re bringing the strength, durability and performance of Kevlar® to new frontiers. Kevlar® aramid fiber is pushing boundaries and defying obstacles every day. |
|||||||||
|
High Vibration Dampening & Self Centering... Made of a Proprietary Rubber Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...
|
 |
|||||||||
 |
High Misalignment... By adapting the High Transverse Flex characteristics of a typical Flex Joint, the Duroflex Joint gives you...
|
|||||||||
|
Absorbs Micro-Movements... Because the Duroflex Bushing absorbs the millions of Rotational Micro-Movements found in your daily driving, you get...
|
 |
|||||||||
 |
True Bearing Surface... The outer surface of the Duroflex Bushing acts as a bearing, breaking free when called for, giving you...
|
|||||||||
|
Low Maintenance & Rebuildable... Unlike typical Flex Joints, the Duroflex does not require replacing key parts every year like others... But, when you do need to rebuild it, it is MetalCloak easy! Just pull out the Duroflex Bushing, clean it up, add some new Teflon impregnated, synthetic silicone grease. Reassemble. Done. |
 |
|||||||||
|
||||||||||
|
DEGREES OF ARTICULATION... MetalCloak's Duroflex Joint provides 28° more articulation and flex than typical control arms! |
||||||||||
 |
 |
|||||||||
|
||||||||||
TECHNICAL SPECIFICATIONS
| SHIPPING & MATERIAL SPECIFICATIONS | ||||||||||
|
||||||||||
|
||||||||||
| INSTALLATION | ||||||||
|
||||||||
|
||||||||
