It's Your Jeep, Only Better

Overland Rocker & Flip Step Kit, Pair, JK, 4-Door

MetalCloak adds functionality and protection with the JK Overland 4 Door Rocker Kit. The Overland 4 Door Rocker Kit gives you both the Overland Rocker Base and the Overland Flip Step.

The Overland 4 Door Rocker Base is a boat-side style protection plate that offers high clearance and incredible durability, made from the 11GA cold rolled steel and can be used with or without the Overland 4 Door Flip Step.

The Overland 4 Door Rocker Flip Step offers high clearance and incredible durability, made from the 11GA cold rolled steel and can be easily removed if you want to use The Overland 4 Door Rocker Rail Kit with or without the step rub rail. The JK Overland Flip Step can be mounted in multiple configurations creating an easy Step Plate or a Rub-Rail & Low-Step combination.

Note: This system comes in Raw and MetalCloak's Signature Black Powdercoat.

100% of 100
Availability: Raw Metal Usually Ships in 1 - 2 Weeks
Product Code: 3351*
JK 2 Door Overland Rocker Step MetalCloak Overland Rocker Base and Flip Step provide multiple features including easy entry with a step, high clearance rub rail, or low profile rock slider; all with the ease of a bolt on accessory.
Dividing Line

There are 3 different ways to configure this rocker system. Easy to access bolts allow you to use this system how you need:

  • Hi Clearance Rock Slider
  • Easy Entry Step and Rock Slider
  • Low Profile Slider
JK 4 Door Overland Rocker Step
Dividing Line
Raw Metal Premium Black Textured Powdercoat
If ordered in Raw Metal, we will DA the welds and clean up the product, pack it and ship it right out to you. Our Premium Black Textured Powdercoat is the best in the industry. Powdercoated products usually ship out within two to three weeks. Check out our video on how we powdercoat.
Tube Fender Preparation
Dividing Line
Driver & Passenger Flip Step 11GA Cold Steel Plate
1 1/2"-.120 Steel Tubing
Solid Steel Balls
Driver & Passenger Rocker Base 11GA Cold Rolled Steel
Total Weight 80 lbs
Available in Raw? Yes
Available in Black Powdercoat? Yes
Dividing Line
Installation Difficulty Easy - Bolt On
Body Modification Some Drilling
Time to Install 2 - 4 Hours
Dividing Line


At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
Dividing Line
100% of 100
Write Your Own Review
You're reviewing:Overland Rocker & Flip Step Kit, Pair, JK, 4-Door
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.