It's Your Jeep, Only Better

ExoCorner LED Kit, Pair, JK

The JK Wrangler ExoCorner LED Kit provides additional strength and rock-biting protection to the vulnerable corner of your 2-door or 4-door JK without the extensive body mods required with other corner guards.

Designed as a kit to work with the MetalCloak ExoSkins and Rear Stock Corner Plates, the parts can also be purchased individually.

The ExoCorner LED Kit kit includes:
  • 2 ExoCorner Rails
  • 2 JK LED Housings
  • LED Tail Light
  • Driver & Passenger Rear ExoSkin
Note: This Product does not come in raw metal.

91% of 100
Availability: Usually Ships in 1 Week
Product Code: 3430
Dividing Line

Shipping MetalCloak Fenders

The ExoCorner is the first Corner Guard for the JK that requires no cutting of the JK body just to make it fit.

1. ExoCorner Rail

T6 Aircraft Grade Aluminum provides over a 1/4" of True Corner Protection.

2. JK LED Housing

T6 Aircraft Grade Aluminum replacement LED housing is the first truly solid JK Aftermarket Light System that requires no Body Modification and can be used with or without the ExoCorner bolting right into your stock light position.

3. LED Tail Light

Much brighter then stock lights, these LEDs are SAE/DOT compliant and wire up directly.

4. Rear ExoSkin & Rear Corner Plate

Providing just the right amount of protection while eliminating the need to cut up your JK just to make the corner fit.

This kit's bolts integrates with the JK Rear ExoSkin for the 2-Door ( SKU: 3411) or 4-Door (SKU: 3410)

Dividing Line


Check out what Jeepers everywhere are saying about our products on The Buzz Page.
Dividing Line
Driver & Passenger ExoCorner 11GA Cold Steel Plate
T6 Aluminum
Total Weight 14 lbs
Available in Raw? No
Available in Black Powdercoat? No
Available in Black Anodized? Yes
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Installation Difficulty Moderate - Some Drilling & Wire Testing
Body Modification Some Drilling
Time to Install 1 - 2 Hours
OEM Clevite and Typical Flex Joint is the Duroflex Joint


At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
OEM Clevite and Typical Flex Joint is the Duroflex Joint
91% of 100
Write Your Own Review
You're reviewing:ExoCorner LED Kit, Pair, JK
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.