It's Your Jeep, Only Better

Grade-8 Suspension Hardware Upgrade Kit, JK Wrangler

Rating:
60% of 100
Product ID: 7214
MetalCloak's Jeep JK Wrangler Full Replacement Suspension (Control Arm & Track Bar) Hardware Kit is a 70 piece bolt kit that features replacement hardware for all control arms and your front and rear track bars.

MetalCloak's Patened Duroflex Control Arms do not put the stresses on stock hardware like typical suspension kits do, so you can easily use all your stock hardware. But, if your JK is old, worn out, or mother nature has played havoc with your stock hardware, this kit is your ultimate solution.


Note: This item is considered a Builder Part, as such there are no instructions for the use of these products; if using any of the builder parts you should be confident of your mechanical skill level and know that you will use at your own risk.

$89.00
Availability: Usually Ships in 1 Week

MetalCloak's Jeep Wrangler TJ/LJ Body Armor

Who Is MetalCloak?

MetalCloak creates Game-Changing Products for the Off Road Enthusiast.

THE TECH

Grade-8 Suspension Hardware Upgrade Kit

The MetalCloak Jeep JK Wrangler Suspension (Control Arm & Track Bar) Replacement Hardware Kit is a 70 piece kit that includes:

  • 16 Grade 8 Bolts, 30 Washers, 14 Nuts & 2 Flag Nuts for JK Control Arms
  • 4 Grade-8 Bolts & Nuts for Front & Rear Track Bars
Truly the most complete kit on the market to replace your old, worn out, Jeep JK Wrangler hardware.
Rating:
60% of 100
Write Your Own Review
You're reviewing:Grade-8 Suspension Hardware Upgrade Kit, JK Wrangler
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.