Frame-Built Bumper #231001, TJ
MetalCloak's Jeep TJ & LJ Wrangler Frame-Built Bumper (Pre-Configured) - one of our most popular builds.
Features Include:- Frame Built Bumper Base
- 43” Hi-Crawler Caps
- Hi-Mount Shackles
- Winch Guard
- All Hardware Required
- Easy Installation
- Made in the USA
The base is designed to mount all popular winch brands; the unique design ensures the winch is as low as possible for the best possible air flow through the Seven Slot grill.
The hi crawler caps mounts directly to the MetalCloak frame built bumper base measuring 43” from end to end when installed. The hi crawler caps are designed to work in conjunction with the hi-mount shackle kit, made of strong laser cut 3/16” steel, have built in approach angles to help slide up and over obstacles, and is finished in MetalCloak’s signature black texture powder coat to help protect them against the elements.
The hi-mount shackles mount directly to the MetalCloak bumper base and are designed to hold 3/4" D-ring shackles. 2” thick aluminum structure provides a strong recovery point when out on the trail. The hi-mount shackles are finished in type-III mil spec black anodized finish to help protect them against the elements. The hi-mount shackles come with a round edge design that allows for either the use of a standard metal D-Ring or Soft Shackle.
The winch guard's low-profile design adds protection without obstructing your line of sight. Made of strong 3/16" hot rolled steel and 1 3/4” steel tubing. The guard protects the winch from damage when out on the trail while providing no loss in approach angle like typical bulky front bumpers. The winch guard comes with welded on shackle mount recovery points for when you or others are stuck on the trail.
Note: On January 2024 Improved shackle mount design. The “rounded edge” design allows for the use of either standard metal d-rings or soft shackles.
Note: All TJ/LJ/YJ Hoops come with weld on shackles.
Note: Shackle mounts are engineered to be used as recovery points only; the shackle mounts are NOT designed for flat-towing.
[click for less...]
VIDEOS
MetalCloak's Jeep Wrangler Bumpers.
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
TJ/LJ/YJ Frame Built Bumper Base
The Frame-Built Base is rugged in function and sleek in design.
Winch Guard
The Guard’s low-profile design adds protection for the winch and offers a non-obtrusive presence that mount to the MetalCloak Frame-Built Bumper Systems perfectly.
Premium Black Powder Coat
Our signature Black Textured Powder coat provides a micro-texture semi-gloss finish that is easily repairable after trail damage. Watch the video to learn more.
THE TECH
Front Bumper Base
The MetalCloak Front Bumper for the Jeep YJ/TJ/LJ Wranglers and provides a customized look.
- 3/16" Steel Plate
- 45° Approach Angle
- 30K PSI Yield Strength (Bend Point)
- 49K PSI Tensile Strength (Break Point)
- Seamless Construction (Zero Welds)
- Premium Black Texture Powder Coating
Specifications
The Frame-Built Bumper Base replaces the weak factory bumper with a 3/16" steel plate that is a sturdy platform for mounting a winch to.
Bolts directly on and works with all components.
43" Hi Crawler Caps
The MetalCloak 43" Hi Crawler Caps for the Jeep CJ/YJ/TJ/LJ Wranglers and provides a customized look for MetalCloak frame-built front bumpers.
- 3/16" Hot Rolled Steel Plate
- 45° Approach Angle
- 50° Front Turning Clearance
- 45° Side Clearance Angle
- Seamless Construction (Zero Welds)
- Premium Black Texture Powder Coating
Specifications
The 43" Hi Crawler Caps mounts directly to the MetalCloak bumper base and is designed for mounting with the hi mount shackle kit. The crawler caps are made of 3/16" hot rolled steel plate and provides minimal obstructions and the best in approach angles.
Bolts directly on and works with all components.
Hi-Mount Shackle Systems
The MetalCloak Hi-Mount Shackle System for CJ/YJ/TJ/LJ Jeep Wrangler Frame-Built bumper provides a unique upper recovery mount that is trail-tested tough capable of handling anything you can throw at it.
- T6 Aircraft-Grade Aluminum
- Type III Mil Spec Anodized Hard Coat Finish
- Holds up to 3/4" Shackles/D-Rings
Round Edge Design
The Billet Shackle System (as of January 2024) has a rounded edge design that allows for either the use of a standard metal D-Ring or Soft Shackle.
Specifications
The hi-mount shackles mount directly to the MetalCloak bumper base and is designed to hold 3/4" D-ring shackles. The hi-mount shackles are made of 2” aluminum and provide a strong recovery point when out on the trail. The hi-mount shackles are finished in type-III mil spec black anodized finish to help protect them against the elements.
Like all out components, they are Frame-Built and can be bolted directly to the frame with or without the Frame-Built Base.
Winch Guard
The MetalCloak Winch Guard for the Jeep CJ/YJ/TJ/LJ Wranglers and provides a customized look for MetalCloak frame-built front bumpers.
- 1 3/4" .120 Wall Tubing
- Hot Formed 3/16" Steel Plate
- 45° Approach Angle
- 8 1/4" Height Above Bumper
- 22 3/4" Guard Width
- Premium Black Texture Powder Coating
Specifications
The winch guard's low-profile design adds protection without obstructing your line of sight. Made of strong 3/16" hot rolled steel and 1 3/4” steel tubing. The guard protects the winch from damage when out on the trail while providing no loss in approach angle like typical bulky front bumpers.
Bolts directly on and works with all components.
What's in the Kit?
- Front Bumper
- 43" Hi-Crawler Caps
- Hi-Mount Shackles
- Winch Guard
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 1987 - 1995 YJ Wrangler | 1997 - 2006 TJ/LJ Wrangler |
| Front Bumper Base | 3/16" Hot Rolled Steel Plate |
| 43" Hi-Crawler Caps | 3/16" Hot Rolled Steel Plate |
| Hi-Mount Shackles | 2" x 1 1/4" Aluminum 6061-T6 |
| Winch Guard | 1 3/4" x .120 Wall Steel Tube 3/16" Hot Rolled Steel Plate |
| Steel Coating |
Black Powder Coat - Bumper, End Caps & Winch Guard Black Anodized - Hi-Mount Shackles |
IMPORTANT NOTES
Soft Shackles: On January 2024 Improved shackle mount design. The “rounded edge” design allows for the use of either standard metal d-rings or soft shackles.
Hoops: All TJ/LJ/YJ Hoops come with weld on shackles.
Recovery Points: Shackle mounts are engineered to be used as recovery points only; the shackle mounts are NOT designed for flat-towing.
INSTALLATION
| Installation Difficulty | Easy |
| Body Modification | None |
| Time to Install | 1 - 2 Hours |
| Installation Instructions | Click Here to see a full list of MetalCloak Installation Instructions. |