JK/JKU Wrangler Aluminum Housing, ExoCorner, LED Lo-Profile Taillight Kit, Pair
The JK/JKU Wrangler ExoCorner LED Lo-Profile Taillight Kit provides protection for the vulnerable corner of your 2-door or 4-door JK without the extensive body mods required with other corner guards; This system replaces the dim factory taillight with Hi-Visibility/Lo-Profile LED taillights.
Features Include:- 6061 T6 Aluminum Bar ExoCorner Rails
- 6061 T6 Aluminum LED Housings
- Hi-Vis LED Taillight Replacements
- Lo-Profile Design for Maximum Clearance
- Driver & Passenger 1/8" Steel Plate Rear ExoSkins
- LED Resistors
- Type III Anodized Black Aluminum Finish
- Black Powdercoated Steel Finish
- Made in the USA
Designed as a kit to work with the MetalCloak ExoSkins, the 6061 T6 aluminum bar attaches and reinforces the 1/8" cold rolled steel plate ExoSkin to provide abundant strength and protection.
The machined billet 60601 T6 aluminum housings incorporate low profile/high visibility LED replacement taillights for a truly custom upgrade from stock.
The Rear ExoCorner Kit provides resistors to correct and prevent hyper-blinking; this correction retains the turn signals standard/OE flash rate. The added resistors also prevents warning messages from being triggered on the dashboard. The resistors finned, aluminum, heat-sink design helps dissipates heat when in use for long life.
The mil spec anodizing and signature powdercoat keeps the package looking great.
Note: This system comes in MetalCloak's Signature Black Powdercoat only. Does NOT come in Raw.
[click for less...]
VIDEOS
MetalCloak's Jeep JK/JKU Wrangler Body Armor
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
JK/JKU ExoCorner LED Taillight Kit
Add the needed protection with an upgraded style, efficiency and performance of LED taillights on your JK/JKU Wrangler!
Premium Black Powdercoat
Our signature Black Textured Powdercoat provides a micro-texture semi-gloss finish that is easily repairable after trail damage. Watch the video to learn more.
THE TECH
JK/JKU ExoCorner LED Kit
The ExoCorner is the first Corner Guard for the JK/JKU that requires no cutting of the Jeep body just to make it fit.
1. ExoCorner Rail - T6 Aircraft Grade Aluminum provides over a 1/4" of True Corner Protection.
2. JK/JKU LED Housing - T6 Aircraft Grade Aluminum replacement LED housing is the first truly solid JK/JKU Aftermarket Light System that requires no Body Modification and can be used with or without the ExoCorner bolting right into your stock light position.
3. LED Taillight - Much brighter then stock lights, these LEDs are SAE/DOT compliant and wire up directly.
4. Rear ExoSkin & Rear Corner Plate - Providing just the right amount of protection while eliminating the need to cut up your Jeep just to make the corner fit.
This kit's bolts integrates with the JK/JKU Rear ExoSkin for the 2-Door or 4-Door.
Stock vs. MetalCloak - Taillight Profile
The machined billet 60601 T6 aluminum housings incorporate low profile LED replacement taillights for a truly custom upgrade from stock.
Stock vs. MetalCloak - Taillight Luminosity
Much brighter then stock lights, these LEDs are SAE/DOT compliant and wire up directly.
LED Resistors
The Rear ExoCorner LED Kit provides resistors to correct and prevent hyper-blinking; this correction retains the turn signals standard/OE flash rate. The added resistors also prevents warning messages from being triggered on the dashboard. The resistors finned, aluminum, heat-sink design helps dissipates heat when in use for long life.
What's in the Kit?
- ExoCorner Rails
- LED Housing
- LED Taillights
- Rear Corner Plate
- Resistors
- Resistor Brackets
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2007 - 2018 JK Wrangler |
| ExoCorner Plate | 1/8" Cold Rolled Steel |
| ExoCorner Rail | T6 Aluminum |
| LED Housing | T6 Aluminum |
| Steel Coating | Black Powder Coat - Steel Black Anodized - Aluminum |
IMPORTANT NOTES
Finish: This system comes in MetalCloak's Signature Black Powdercoat only. Does NOT come in Raw.
INSTALLATION
| Installation Difficulty | Moderate |
| Body Modification | Some Drilling & Wiring |
| Time to Install | 1 - 2 Hours |
| Installation Instructions | Click Here to see a full list of MetalCloak Installation Instructions. |