Duroflex Joint, 2" x 1/2" BH x 2 1/4" Housing x 1" Straight Shank

Product ID: 7311*

MetalCloak's Game-Changing Duroflex^TM Joints provide the industry's best ride quality. Period.

Our Patent Pending (#13/368,570) Joints feature:

Maximum Vibration Dampening
Self-Centering
Minimum Bushing Wear
Misalignment: 34°/Joint, 68°/Control Arm
Unconstrained Rotational Flex
Low Maintenance and Easily Rebuildable
Gold Zinc Plated for Corrosion Protection

DuroflexTM Joints are specifically designed for installation on both ends of a suspension link and/or control arm.

Kit Specs:

Housing Diameter = 2 1/4"
Bushing Width = 2"
Bolt Hole Diameter = 1/2"
Shank Thread = 1"-14 UNF

Note: Warranty valid ONLY if Duroflex™ Joints are installed on both ends of the control arm.

$54.00

Availability: Usually Ships Within 3-5 Days

Add to Build List

Details

DUROFLEX 101-EVERYTHING YOU NEED TO KNOW ABOUT THE DUROFLEX JOINT

This short video covers everything you need to know about the basics of the MetalCloak Duroflex Joint.

Check Out the Video>>>

WHY THE DUROFLEX JOINT?

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34°), Self-Centering, Rebuildable Joint with an OEM quality ride.

OEM Style Clevite Joint

Typical Flex Joint

MetalCoak Duroflex Joint

High Vibration Dampening
Self-Centering
Fused at Center Bushing
(No Bearing Surface Wear)

High Transverse Flex
High Rotational Flex
Rebuildable

High Vibration Dampening
Self-Centering
Fused Center Bushing
(No Bearing Surface Wear)
High Transverse Flex
High Rotational Flex
Rebuildable

THE DUROFLEX JOINT PROVIDES THE BEST RIDE. PERIOD.

High Vibration Dampening & Self Centering...

Made of a Proprietary Rubber Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...

The best ride quality
No binding of your control arms.
None of the micro-wear that DESTROYS Flex Joints

High Misalignment...

By adapting the High Transverse Flex characteristics of a typical Flex Joint, the Duroflex Joint gives you...

Over 34° of Misalignment
Over 68° per Control Arm

Absorbs Micro-Movements...

Because the Duroflex Bushing absorbs the millions of Rotational Micro-Movements found in your daily driving, you get...

Improved Ride Quality
None of the micro-wear that DESTROYS Flex Joints

True Bearing Surface...

The outer surface of the Duroflex Bushing acts as a bearing, breaking free when called for, giving you...

Maximum Rotation & Articulation
No "Binding Up" of the Control Arms

Low Maintenance & Rebuildable...

Unlike typical Flex Joints, the Duroflex does not require replacing key parts every year like others...

But, when you do need to rebuild it, it is MetalCloak Easy!

Just pull out the Duroflex Bushing, clean it up, add some new Teflon impregnated, synthetic silicone grease. Reassemble.

Done.

DEGREES OF ARTICULATION...

MetalCloak's Duroflex Joint provides 28° more articulation and flex than typical control arms!

METALCLOAK'S DUROFLEX JOINT IN ACTION

We tested MetalCloak's Duroflex Joint using a "Shaker Table" and Seismometer app to show how much Vibration Dampening the Duroflex Joint gives you compared to other industry leading joints.

Check Out the Video>>>