It's Your Jeep, Only Better

1500/2500/3500 Dodge Lower Front Control Arms (2010-2012)

The MetalCloak Dodge Front Lower Control Arms for the 1500/2500/3500 are precision engineered for all the flex and the smoothest ride.

Equipped with the MetalCloak Duroflex self-centering composite bushings at both ends for a combined misalignment of over 76 degrees.

All parts are treated with Gold Zinc Chromate for the ultimate in defense against the elements. MetalCloak takes the guess work out and engineered these in corrected lengths designated for lifted or leveling applications.

The easy to install Front Control Arm Kit (2010-2012) includes:
  • Left & Right Side (Driver & Passenger)
  • 2 Lower front control arms
  • 4 Duroflex spherical joints
  • 8 Retainer washers
  • 8 C clips
Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Truck Once MetalCloak Suspension is Installed.

$279.00
Availability: Usually Ships in 1 to 2 Weeks
Product Code: 8008

DUROFLEX 101-EVERYTHING YOU NEED TO KNOW ABOUT THE DUROFLEX JOINT

This short video covers everything you need to know about the basics of the MetalCloak Duroflex Joint.

Check Out the Video>>>

Dividing Line

Q: WHAT IF A CLEVITE JOINT MET A FLEX JOINT IN A BAR...

A: You'd have the key to the MetalCloak Control Arms, the Patent Pending Duroflex™ Joint ( metalcloakpatents.com)

Standard Tube FEnder Clearance

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34˚), Self-Centering, Rebuildable Joint with an OEM quality ride.

OEM Style Clevite Joint Typical Flex Joint MetalCloak Duroflex Joint
  • High Vibration Dampening
  • Self-Centering
  • Fused at Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
  • High Vibration Dampening
  • Self-Centering
  • Fused Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
Dividing Line
THE DUROFLEX JOINT PROVIDES THE BEST RIDE. PERIOD.

High Vibration Dampening & Self Centering...

Made of a Proprietary Rubber Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint means you will always get...

  • The best ride quality
  • No binding of your control arms.
  • None of the micro-wear that DESTROYS Flex Joints

Dividing Line
DEGREES OF ARTICULATION...

MetalCloak's Duroflex Joint provides 28˚ more articulation and flex then typical control arms!

Standard Tube FEnder Clearance Standard Tube FEnder Clearance
Dividing Line
SHIPPING & MATERIAL SPECIFICATIONS
ItemsMaterials
Duroflex Bushing Proprietary Vulcanized Rubber
Control Arm Tube 4130 Chromoly
Total Weight 10 lbs
Available in Gold Zinc? Yes
OEM Clevite and Typical Flex Joint is the Duroflex Joint
LOWER CONTROL ARM SPECIFICATIONS...
8002 Dodge Lower Control Arm specs
OEM Clevite and Typical Flex Joint is the Duroflex Joint
INSTALLATION
Installation Difficulty Easy-Bolt on
Body Modification None
Time to Install 1 - 2 Hours
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Icon

INSTALLATION INSTRUCTIONS:

At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Write Your Own Review
You're reviewing:1500/2500/3500 Dodge Lower Front Control Arms (2010-2012)
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.