Bronco 6G Rear Bumper System
RoughStock Rear Bumper for the Bronco 6G by MetalCloak. Rock-Crawling heritage and desert race inspired design with ultimate functionality. Clearance, Protection and practical utility with great looks.
Features Include:- 3/16" Steel Base
- 2"OD X .125 Wall DOM Tube
- Full Length Skid Plate
- 1/8" Steel Reinforcement Frame Brackets
- 2 Sensor Holes Per Cap
- 2 Machined 1x2 Steel D-Ring Recovery Points
- Body & Frame Mounting
- Cut Out For Lights/With Fill Plates
- High Clearance Relocation Tow Plug Mount With Filler Plate
- All Hardware Required
- Made in the USA
The strong 3/16" steel base attaches to the tube end caps and completely wrap around to the sides of your vehicle providing full protection.
Massive recovery points made of machined 1x2 inch machined steel are at the ready when the time comes. Every aspect of this bumper has been though out; clearance for oversized spare tire, sensor holes to retain factory safety features, angled end caps for clearance, cut outs for additional lighting (with fill plates) repositioned and protected tow plug mount (with filler cap) and the best departure angles you are going to find.
If you are Looking for a fantastic addition to upgrade your bumper for your Bronco get the Protection, Clearance and additional practical features from a MetalCloak bumper that is made right here in the USA.
[click for less...]
VIDEOS
MetalCloak's Bronco 6G Bumpers
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Bronco Rear Bumper System
The Rear Bumper for the Bronco 6G by MetalCloak. Rock-Crawling heritage and desert race inspired design with ultimate functionality.
Premium Black Powder Coat
Our signature Black Textured Powder coat provides a micro-texture semi-gloss finish that is easily repairable after trail damage. Watch the video to learn more.
Proudly Made in the USA
MetalCloak proudly manufactures products in America. Take a glimpse of our incredible team that lives and breaths innovation and quality.
THE TECH
Bronco 6G Rear Bumper System
Rear Bumper for the Bronco by MetalCloak. This bumper includes our Rock-Crawling heritage with desert race inspired design that provides utilitarian functionality. Get Clearance, Protection, a Lo-profile winch mount, with practical utility and great looks.
End Caps
The strong 3/16" steel base attaches to the tube end caps and completely wraps around to the sides of the vehicle providing full protection.
Tow Plug Adapter
The MetalCloak Bronco Rear Bumper isn't just strong, everything has been thought out including the ability to protect and integrate the electrical tow plug outlet.
Cut Outs For Lights
The Bronco 6G Rear Bumper base has provisions engineered into the configuration for additional lights; the bumper includes filler plates if you choose to not add more lighting.
* Pictured with Baja Designs S2 Lights.
D-Ring Recovery Points
Massive recovery points made of machined 1x2 inch machined steel are at the ready when the time comes.
Factory Hitch
The MetalCloak Bronco Rear Bumper has an engineered cut out that allows for the use of the factory hitch without interference.
Factory Sensors
Fits the original equipped sensors back into your bumper with a factory OEM look and function.
- Works on 3/16" Bumpers
- Fits 1" Diameter Hole
- Made of UV Resistant ABS
- Snaps Into Place
What's in the Kit?
- Rear Bumper Base
- End Caps
- Recovery Points
- Factory Sensor Clips
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2021 + Bronco 6G |
| Rear Bumper Base | 3/16" Hot Rolled Steel |
| End Caps | 3/16" Hot Rolled Steel 2.0" OD X .125 Wall DOM Steel Tube |
| Coating | Black Powder Coat |
INSTALLATION
| Installation Difficulty | Moderate |
| Body Modification | None |
| Time to Install | 4 - 5 Hours |
| Installation Instructions | Click Here to see a full list of MetalCloak Installation Instructions. |