Bronco 6G Front Bumper System
Front Winch Bumper for the Bronco by MetalCloak. Rock-Crawling heritage and desert race inspired design with utilitarian functionality. Clearance, Protection Lo-profile winch mount, practical utility with great looks.Features Include:
- 3/16" Steel Base
- 2"OD X .125 Wall DOM Tube
- Lo-profile Winch Mount
- Full Length Skid Plate
- 1/8" Steel Reinforcement Frame Brackets
- 2 Sensor Holes Per Cap
- 2 Machined 1x2 Steel D-Ring Recovery Points
- Body & Frame Mounting
- Cut Out For Lights/With Fill Plates
- All Hardware Required
- Made in the USA
The lowest profile winch mount possible was made to keep "center of pull" low and allow unrestricted of airflow to the engine. Massive recovery points made of machined 1x2 machined steel are at the ready when the time comes.
Every aspect of this bumper has been thought out; sensor holes to retain factory safety features, angled end caps for clearance, cut out for additional lighting (with fill plates) and some of the best approach angles you are going to find.
If you are Looking for a fantastic addition to upgrade your bumper for your Bronco; get the protection, clearance and additional practical features from a MetalCloak Front Bumper that is made right here in the USA.
[click for less...]
MetalCloak's Bronco 6G Bumpers
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Bronco Front Bumper System
MetalCloak's Front bumper for the Bronco mixes the strength of our rock-crawling heritage with desert race inspired looks and all the features and function you want from a bumper
Premium Black Powder Coat
Our signature Black Textured Powder coat provides a micro-texture semi-gloss finish that is easily repairable after trail damage. Watch the video to learn more.
Proudly Made in the USA
MetalCloak proudly manufactures products in America. Take a glimpse of our incredible team that lives and breaths innovation and quality.
Bronco 6G Front Bumper System
Front Winch Bumper for the Bronco by MetalCloak. Rock-Crawling heritage and desert race inspired design with utilitarian functionality. Clearance, Protection Lo-profile winch mount, practical utility with great looks.
The strong 3/16" steel base attaches to the tube end caps and completely wraps around to the sides of the vehicle providing full protection.
A full length skid plate runs from the bumper to your center section to ensure you slide up and over the hazards on the trail. MetalCloak allows you to choose between a steel skid plate that comes in our signature textured black powder coat or shed some weight with the aluminum skid plate option which comes in a raw finish.
Low Profile Winch Mount
The lowest profile winch mount possible was made to keep "center of pull" low and allow unrestricted of airflow to the engine.
Cut Outs For Lights
The Bronco 6G Front Bumper base has cut out for additional lighting and filler plates are provided if you do not want additional lighting.
* Pictured with Baja Designs S2 Lights.
D-Ring Recovery Points
Massive recovery points made of machined 1x2 machined steel are at the ready when the time comes.
Fits the factory sensors into your bumper with a factory OEM look and function.
- Works on 3/16" Bumpers
- Fits 1" Diameter Hole
- Made of UV Resistant ABS
- Snaps Into Place
What's in the Kit?
- Front Bumper Base
- End Caps
- Steel or Aluminum Skid Plate
- Recovery Points
- Factory Sensor Clips
- All Required Hardware
|Compatibility||2021 + Bronco 6G|
|Front Bumper Base||3/16" Hot Rolled Steel|
|End Caps||3/16" Hot Rolled Steel
2.0" OD X .125 Wall DOM Steel Tube
|Skid Plate||3/16" Hot Rolled Steel
3/16" 5052-H32 Aluminum Plate
|Coating||Black Powder Coat
Aluminum Skid Plate - Raw Metal
|Time to Install||4 - 5 Hours|
|Installation Instructions||Click Here to see a full list of MetalCloak Installation Instructions.|