It's Your Jeep, Only Better

"Big Bolt" TJ/LJ Wrangler Upper Rear Double Adjustable Aluminum Control Arms

The MetalCloak "Big Bolt" TJ/LJ Upper Rear Double Adjustable Aluminum Control Arms provide a rugged option with a larger diameter hole at in the joints to allow for a bigger 1/2" bolt, while maintaining precision adjustability.

Manufactured out of solid 1½" Extruded Aircraft Grade Aluminum Hex Bar, the control arms are not only just prepared to take on any off-road abuse thrown at em'; they also provide more material between the OD and the ID vs. other aluminum control arms on the market. The Aluminum Hex Bar configuration makes them incredibly easy to adjust too. All new mounting hardware is included.

Now made with DuPont™ Kevlar® fiber - the first suspension components manufactured with Kevlar® for industry leading durability.

Equipped with the Patent Pending MetalCloak Duroflex™ (metalcloakpatents.com) self-centering composite bushings at both ends for a combined misalignment of over 68 degrees.

Note: Brackets must be drilled out to fit larger diameter bolt.

Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once Suspension is Installed.

$309.00
Rating:
100% of 100
Availability: Usually Ships in 1 to 2 Weeks
Product Code: 7077

DUROFLEX 101-EVERYTHING YOU NEED TO KNOW ABOUT THE DUROFLEX JOINT

This short video covers everything you need to know about the basics of the MetalCloak Duroflex Joint.

Check Out the Video>>>

Dividing Line

NEW! DOUBLE ADJUSTABLE ALUMINUM UPPER REAR CONTROL ARMS

The Double Adjustable Control Arm for the TJ/LJ Upper Rear are aluminum short arms designed to accept Duroflex Joints at each end.
  • Right Hand and Left Hand Duroflex Joints
  • Aircraft Grade Aluminum Hex Stock
  • Easy to Adjust
  • Added Material for Additional Strength
  • Standard Length - 14 in
  • Minimum Length - 13.125 in
  • Maximum Length - 15.25 in
7057 Exploded View
Dividing Line

Q: WHAT IF A CLEVITE JOINT MET A FLEX JOINT IN A BAR...

A: You'd have the key to the Patent Pending MetalCloak Control Arms, the Duroflex Joint ( metalcloakpatents.com)

Standard Tube FEnder Clearance

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34°), Self-Centering, Rebuildable Joint with an OEM quality ride.

OEM Style Clevite Joint Typical Flex Joint MetalCloak Duroflex Joint
  • High Vibration Dampening
  • Self-Centering
  • Fused at Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
  • High Vibration Dampening
  • Self-Centering
  • Fused Center Bushing
    (No Bearing Surface Wear)
  • High Transverse Flex
  • High Rotational Flex
  • Rebuildable
Dividing Line

DEGREES OF ARTICULATION...

MetalCloak's Duroflex Joint provides 28° more articulation and flex than typical control arms!

Standard Tube FEnder Clearance Standard Tube FEnder Clearance
Duroflex Kevlar Bushing The MetalCloak Kevlar® bushings can be identified by the M located on the surface.

DuPont™ Kevlar® continues to take on new challenges, their scientists are continuously innovating and working on a range of new opportunities through collaborations with communities, industrial manufacturers, and governments. Together we’re bringing the strength, durability and performance of Kevlar® to new frontiers. Kevlar® aramid fiber is pushing boundaries and defying obstacles every day.
Dividing Line

CONTROL ARM SPECIFICATIONS:

OEM Clevite and Typical Flex Joint is the Duroflex Joint

Note: These Control Arm Specifications are Just Starting Points. ALL JEEPS ARE DIFFERENT. MetalCloak Recommends Seeing a Suspension Specialist for Correct Control Arm Lengths For YOUR Jeep.

LARGER BOLT FOR GREATER STRENGTH

TJ Wrangler Upper Rear

  • 1.5" Hex Aircraft Grade Aluminum
  • Precision Locking Nut
  • Gold Zinc Plate
  • Duroflex Joint at Both Ends
TJ Control Arm Specs
Dividing Line

SHIPPING & MATERIAL SPECIFICATIONS
ItemsMaterials
Control Arms 1 1/2" Aluminum Hex Bar
Durotrack Bushing Proprietary Vulcanized Rubber made with DuPont™ Kevlar® fiber
Total Weight 15 lbs
Available in Raw? Yes - Hex Bar
Available in Powdercoat? No
Available in Zinc? Yes
OEM Clevite and Typical Flex Joint is the Duroflex Joint
INSTALLATION
Installation Difficulty Easy
Body Modification None
Time to Install 1 - 2 Hours
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Icon

INSTALLATION INSTRUCTIONS:

At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.
OEM Clevite and Typical Flex Joint is the Duroflex Joint
Rating:
100% of 100
Write Your Own Review
You're reviewing:"Big Bolt" TJ/LJ Wrangler Upper Rear Double Adjustable Aluminum Control Arms
Your Rating

(C) Copyright 2018, Armored Works, LLC - All Rights Reserved. Jeep is a trademark and service mark owned by Fiat Chrysler America. Products sold on this website are intended for Off Road Use Only.