Heavy Duty Steering Knuckles, JL Wrangler, JT Gladiator, Pair

Rating:
100% of 100
Product ID
7500*

MetalCloak Heavy Duty Steering Knuckles are built for the 2018+ JL Wrangler and 2020+ JT Gladiator. Get the increased strength you need over the inferior factory-equipped parts. These upgraded replacement knuckles are ideal for Jeeps that are being used on- or off-road where durability is critical.

Features Include:

  • Fits All JL Wrangler & JT Gladiator Front Axles (2018+ JL / 2020+ JT)
  • Passenger and Driver Side Pair
  • Factory or High Steer Systems
  • Left- or Right-Hand Drive
  • Direct Bolt-In
  • Adjustable Steering Stops
  • Nodular Cast Iron For Strength & Durability
  • Increased Material at Stress Points
  • Compatible With All Aftermarket Axle Shaft Options
  • Finished in Our Signature Gold Metallic
  • Precision Machined Surfaces
The MetalCloak Heavy Duty Steering Knuckles are a great way to upgrade your Jeep for [click for more...] increased strength over the stock aluminum or factory iron components!

If you are wheeling your Jeep with the factory-equipped aluminum steering knuckles, it's only a matter of time before you are going to have a failure; this is a solid upgrade to even the factory-equipped iron knuckles as they are made with additional material in critical areas for maximum strength.

Both the passenger and driver side knuckles are provided; the HD nodular cast iron design is configurable in the factory steering position or may be set up for high steer on taller lift applications. Either way you set it up, there is a noticeable difference in drivability with a more precise feeling of control.

MetalCloak added adjustable steering stops on each of the knuckles so you may dial in the perfect amount of turning radius for whatever tire size you choose in an effort to prevent interference with components.

MetalCloak Heavy Duty Knuckles are finished in a signature Gold Metallic Powder Coat for a durable surface with machined contact points for precise fitment.

Whether you are deciding to upgrade or are in need of replacement parts, rest assured that MetalCloak will provide you with a Heavy Duty solution, with brand reputation and customer service you can rely on.

Note: Fits ALL JL Wranglers and ALL JT Gladiators.

[click for less...]


Availability
Usually Ships within 3-5 days
Price As Configured:

$799.00

Customize Heavy Duty Steering Knuckles, JL Wrangler, JT Gladiator, Pair
Base Option   + $799.00

* Required Fields

 

VIDEOS

MetalCloak's Jeep Suspension

Who Is MetalCloak?

MetalCloak creates game-changing products for the off-road enthusiast.

Steering Knuckles

Steering knuckles take a beating every time you add larger tires, increase suspension travel, or tackle challenging trails. That's why MetalCloak developed the Heavy Duty Steering Knuckles for JL Wrangler & JT Gladiator.

What is Corner Travel Index?

Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.

THE TECH

JL Wrangler & JT Gladiator Heavy Duty Knuckles

MetalCloak Heavy Duty Steering Knuckles are built for the 2018+ JL Wrangler and 2020+ JT Gladiator. Get the increased strength you need over the inferior factory-equipped parts. These upgraded replacement knuckles are ideal for Jeeps that are being used on- or off-road where durability is critical.

The MetalCloak Heavy Duty Steering Knuckles are a great way to upgrade your Jeep for increased strength over the stock aluminum or factory iron components!

Pair of Jeep JL Wrangler heavy-duty steering knuckles with gold powder coat finish and reinforced construction.

Stock vs. Heavy Duty Knuckles

If you are wheeling your Jeep with the factory-equipped aluminum steering knuckles, it's only a matter of time before you are going to have a failure; this is a solid upgrade to even the factory-equipped iron knuckles as they are made with additional material in critical areas for maximum strength.

Factory Jeep JL Wrangler stock aluminum steering knuckle shown for comparison with OEM mounting points and bearing location.Heavy-duty Jeep JL Wrangler steering knuckle with gold powder coat finish, reinforced design, and upgraded strength over stock components.

Adjustable Steering Stops

Close-up of adjustable steering stop bolt installed on a Jeep JL Wrangler heavy-duty steering knuckle with arrow highlighting the adjustment point.

MetalCloak added adjustable steering stops on each of the knuckles so you may dial in the perfect amount of turning radius for whatever tire size you choose in an effort to prevent interference with components.

Stock & Hi-Steer Positions

Both the passenger and driver side knuckles are provided; the HD nodular cast iron design is configurable in the factory steering position or may be set up for high steer on taller lift applications. Either way you set it up, there is a noticeable difference in drivability with a more precise feeling of control.

Rendered front suspension view showing a heavy-duty steering knuckle with the tie rod mounted in the factory stock steering position below the upper ball joint, maintaining OEM steering geometry.Rendered front suspension view showing a heavy-duty steering knuckle with the tie rod mounted in the hi-steer position above the axle centerline for improved steering geometry and increased ground clearance.

What's in the Kit?

  • Heavy Duty Steering Knuckles
  • Adjustable Steering Stops
  • Steering Stop Nuts
  • Drag Link Bushing
Contents of the MetalCloak JL Wrangler & JT Gladiator Heavy Duty Steering Knuckles kit, including the heavy duty steering knuckles, adjustable steering stops, steering stop nuts, and drag link bushing.

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2018+ JL Wrangler & 2020+ JT Gladiator
Knuckles Nodular Cast Iron
Finish Gold Powder Coat


IMPORTANT NOTES



Models: Fits ALL JL Wranglers and ALL JT Gladiators.

INSTALLATION



Difficulty Easy
Body Modification None
Time to Install 2-3 Hours
Installation Instructions View JL Wrangler & JT Gladiator Heavy Duty Steering Knuckles installation instructions.


CUSTOMER QUESTIONS
What if I already have rpm ball joints will I be able to reuse them
The knuckles are a replacement for stock. Your current steering should bolt in without any issues.
I have RCV axles for my Gladiator. Do I have to disassemble them in order to change out my old knuckles and put the metalcloak ones in?
The axle shafts will need to be removed during the process of replacing the knuckles. It would be a good time to do any maintenance on the shafts too.
Can I use these knuckles with my cavfab 2.5 ton steering (drag link and tie rod tube)??
Our HD Knuckles are a direct replacement for stock and will allow for any steering system that works with the factory knuckles.
Have a Question? Ask it here...
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account