1303 - 13" 6Pak Shock, Passenger Side Rear, JK Wrangler

**Now With Longer Travel & Easy Installation!!**

The MetalCloak JK 6Pak 1303 Rear Long Travel Passenger Side Shockprovides the longest shock travel relative to a compressed length for any off-road shock ever built in history. Period.

Stroke: 13"
Compressed Size Eye to Eye: 12 1/4"
Extended Length Eye to Eye: 25 1/4"
Dual Opposing Gas-Charged Reservoirs
Fully Rebuildable (Call about MetalCloak's Rebuild Program)
Improve Wheel Travel and Ride Quality

Each shock is dyno-tested and rod ends are pre-set for easy installation. Shocks ship with the exact specs so you can be confident that your shock is ready for your vehicle.

Shock application is only limited by your knowledge and application. Contact our suspension consultants for assistance on how the 6Pak can be part of your next build.

Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Truck Once MetalCloak Suspension is Installed.

$399.00

Rating:

100% of 100

1 Review Add Your Review

Availability: Usually Ships in 2 to 3 Weeks

Product Code: 1303

Features



MetalCloak 6Pak MetalCloak's Floating Shock Body Technology (FST) provides a game-changing platform featuring parallel shafts extending from a floating body, centralized by dual opposing reservoirs; this revolutionary feature allows for twice the usual stoke over typical industry shocks. Now the problems of low-hanging shocks or limited travel because of your shock body are fully and completely eliminated. The shock is no longer the limiting factor in your build.

	Each 6Pak shock is hand built to exacting standards and then Dyno tested here at MetalCloak in Sacramento California.
Our Next Generation of 6Paks - now with longer travel! Designed specifically for applications where space is paramount; the 6Pak shock body extends shafts from both sides of a floating remote reservoir and allows for a much smaller compressed shock. Thanks to the tireless work of our engineers, we've figured out how to make the 6Pak shocks even better... More Travel! Our original 12" Travel shocks are now 13" Travel and our 14" Travel shocks are now 15" Travel shocks! You're welcome.
	Now Easier to Install! Our new fixed bushing is precisely positioned to ensure easy install. Just put the shock in position and bolt in. This eliminates the original method of having to bind the rod ends against each other just to keep it in place.
Click the image to the right for the 6Pak Owners Guide

Specifications & Materials

SHIPPING & MATERIAL SPECIFICATIONS

6Pak Specs...

Nitrogen Charged:

Dual Opposing Reservoris
150psi - 160 psi per side (end user can custom adjust if desired)

Shaft (Rod) Material:

Parallel Shafts Extend from a floating body
AISI 1045 centerless ground steel shaft, Rockwell hardness C70 hard chrome plated, 12RMS finish

Rod End and Forged Rod End Bushing:

Forged Rod End Housing securely holds Rubber Shock Islolator for increased vibration dampening
Industry Standard rod end (½ inch fine thread) ½ - 20 UNF
Rod End feature adjustable length & Teflon Race

Tube Housing:

Seamless 6061-T6 aircraft-grade aluminum
Piston wearbands are Bronze impregnated Teflon (40% Bronze 60% Teflon)

Shaft Wiper-Seal:

Teflon dual wiper & triple seal

Valve Disks (stacks):

Butteryfly style 17-7PH stainless steel, with a Rockwell hardness of C40
Fully Rebuildable & Tunable

Installation Instructions

INSTALLATION

Installation Difficulty	Easy
Body Modification	None
Time to Install	1 Hour

INSTALLATION INSTRUCTIONS:

At MetalCloak we work continuously to give you the best possible installation instructions. We constantly take customer feedback and look at how we can make the instructions better for you. Click below to see our full list of installation instructions.

Click Here to see a full list of MetalCloak Installation Instructions.