1 1/2" Overline Rub Rail, Pair, TJ/LJ/YJ
- Driver & Passenger Comp Rails
- Ball Lock Joint Attachment
- 1½" X .120 Wall Steel Tube Structure
- 7° Object Deflection Angle
- All Needed Installation Hardware
- Available Raw of Black Powdercoat
- Easy to Install
- Made in the USA
Overline comp rails are built tough with strong 1½ x .120 wall steel tubing and works in conjunction with the overline tube fenders to provide the tire coverage you desire with the strength you demand.
Note: You must have MetalCloak overline tube fenders to mount the comp rails. The comp rails only mount on the MetalCloak overline tube fenders (TJ / YJ).
Note: This system comes in raw and black powdercoat. [click for less...]
MetalCloak's Jeep Wrangler Body Armor
Who Is MetalCloak?
MetalCloak creates Game-Changing Products for the Off Road Enthusiast.
Introducing MetalCloak Tube Fenders
Everything you ever wanted to know about MetalCloak's benchmark products the Arched Tube Fenders and Overline Tube Fenders.
MetalCloak's Premium Black Textured Powdercoat process is detailed in this updated video.
1½" Overline Rub Rails
Keep them on for protection on the trail or the street, or remove them in minutes for those tight, narrow runs.
Easily release the two Ball Lock Joints by removing two 18-8 Stainless Steel bolts on each side.
The most tire clearance in the industry, covering 35s on a stock TJ!
Best object deflection angle and turning clearance in the industry!
Most Tire Clearance
Clearance is not just about what is ABOVE your tire, it is also what is BEHIND your tire. And compared to other typical tube fenders, we can't be beat:• 2.6" ABOVE tire vs. Other Tube Fenders • 5.1" ABOVE tire vs. Stock Flares
• 5" BEHIND tire vs. Typical Flat Fenders • 6.5" BEHIND tire vs. Stock Flares
Strength by Coverage By Desgin
Our signature Quick Release "Ball Lock Joint" keeps trail stresses on the rigid joint and not on the bolt.
Object Deflection & Turning Clearance
These diagrams silenced the critics and proved that MetalCloak truly was the best in the industry.
Here they are shown with the Overline Tube Fender, but the results are similar for the Arched.
Read this article in Four Wheeler Magazine that details the ease of installation for the MetalCloak tube fenders!
What's in the Kit?
- Overline Front Rub Rails
- All Required Hardware
|Compatibility||1987 - 1995 YJ Wrangler | 1997 - 2006 TJ/LJ Wrangler|
|Driver & Passenger Rub Rails||1 1/2" x .120 Steel Tubing|
|Time to Install||10 Minutes|
|Installation Instructions||Click Here to see a full list of MetalCloak Installation Instructions.|